Wij gebruiken cookies om uw ervaring beter te maken. Om te voldoen aan de cookie wetgeving, vragen we uw toestemming om de cookies te plaatsen. Meer informatie.
ICPDAS M-7065D
4-channel Isolated Digital Input and 5-channel Relay Output Module with 16-bit Counters and LED Display (Gray Cover)
● Input: 4 single-ended
ON: Voltage Level: 4 V ~ 30 V
OFF Voltage Level: 0 V ~ 1 V
● Input resistance: 3 kΩ
● Output: 5 Form A power relay
● Contact rating:
5 A@250 VAC / 5 A@30 VDC
The M-7000 series is a family of network data acquisition and control modules that support Modbus RTU and DCON protocols. With the Modbus RTU protocol, it can easily communicate with most popular SCADA/HMI software and PLC. It has the same form factor as the I-7000 series.
ICPDAS Power Relay Module M-7065D is a data acquisition and control module with digital input/output. The module can be remotely controlled using a set of commands, which we call the DCON protocol. Communication between the module and the host is in ASCII format via an RS-485 bi-directional serial bus standard. Baud Rates are software programmable and transmission speeds of up to 115.2K baud can be selected.
The functionality of the M-7000 series is the same as the I-7000 series, except M-7000 series offers extended support for the Modbus RTU protocol.
Channels | 4 | ||||
Input Type | Sink, Source, isolated channels with common ground or power | ||||
On Voltage Level | +4 ~to +30 V | ||||
Off Voltage Level | +1 V max. | ||||
Input Impedance | 3 kΩ, 0.5 W | ||||
Counters |
|
||||
Photo-Isolation | 3750 Vrms |
Channels | 5 | ||
Relay Type | Form "A” relay SPST (N.O.) | ||
Contact Rating |
|
||
Operating Time (Max.) | 6 ms | ||
Release Time (Min.) | 3 ms | ||
Surge Strength | 4,000 VAC | ||
Insulation Resistance | 1000 MΩ min. at 500 VDC | ||
Life Time |
|
Interface | RS-485 |
Format | N, 8, 1 |
Baud Rate | 1200 ~ 115200 bps |
1 LED as Power/Communication indicator |
4 LEDs as Digital Input indicators and 5 LEDs as Relay Output indicators |
Support Modbus and DCON Protocol | Yes |
Input Voltage Range | 10 ~ 30 VDC |
Power Consumption | 1.3 W (max.) |
Operating Temperature | -25 °C ~ +75 °C |
Storage Temperature | -40 °C ~ +85 °C |
Humidity | 5 ~ 95%, non-condensing |