2~7 dagen

4-channel Isolated Digital Input and 4-channel Relay Output Module with LED Display

● 4 Digital Inputs and 4 Relay Outputs
● Both Form A and Form C Power Relay
● Source and Sink type for DI
● DI Channels can be used as 16-bit counters
● Configurable Power-on value settings
● Configurable Safe value settings
● Dual Watchdog
● Operating Temperature Range: -25 °C ~ +75 °C

The M-7000 series is a family of network data acquisition and control modules that support Modbus RTU and DCON protocols. With the Modbus RTU protocol, it can easily communicate with most popular SCADA/HMI software and PLC. It has the same form factor as the I-7000 series.


The ICPDAS Power Relay Module M-7060PD offers 4-channel digital inputs, 2-channel Form A powe relay outputs and 2-channel Form C power relay outputs at the same time. Moreover, you can choose either sink type or source type of digital input via wire connections. All Input channels are able to be used as 16-bit counters. M-7060PD also has 8 LED indicators for power relay outputs and digital inputs status monitoring. And both support the Modbus RTU and DCON protocols which can be configured via software. There are options for configuring power-on and safe digital output values. 4 kV ESD protection and 3750 VDC intra-module isolation are also provided to enrich the noise protection ability for industrial environment. The ICPDAS Power Relay Module M-7060P supports power relay Form A (16 A @ 250 VAC/10 A @ 30 VDC) and Form C (10 A NO/6 A NC @ 250 VAC & 10 A NO/6 A NC @ 30 VDC).



● Building Automation
● Factory Automation
● Machine Automation
● Remote Maintenance
● Remote Diagnosis
● Testing Equipment

Meer informatie
Digital Input/Counter
Channel 4
Contact Wet
Sink/Source (NPN/PNP) Sink/Source
On Voltage Level +10 ~ +50 VDC
Off Voltage Level +4 VDC Max.
Counter (100 Hz, 16-bit) Yes
Input Impedance 10 kΩ
Overvoltage Protection ±70 VDC
Relay Output
Channel 4
Type Power Relay (Form A x2, Form C x2)
Contact Rating
Form A 16 A@250 VAC
10 A @ 30 VDC
Form C 10 A(NO)/6 A(NC) @ 250 VAC
Surge Strength 2500 VDC
Operate Time 6 ms
Release Time 3 ms
Mechanical Endurance 107 ops
Electrical Endurance 5 × 104 ops
Power-on Value Yes
Safe Value Yes
Communication Interface
Interface RS-485
Format (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)
Baud Rate 1200 ~ 115200 bps
Protocol Modbus RTU, DCON
Dual Watchdog Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicators
1 LED Power/Communication Indicator
I/O LED Indicator Yes
7-Segment LED Display N/A
Intra-Module Isolation, Field-to-Logic 3750 Vrms
EMS Protection
ESD (IEC 61000-4-2) ±4 kV
EFT (IEC 61000-4-4) ±4 kV
Surge (IEC 61000-4-5) ±3 kV
Reverse Polarity Protection Yes
Input Range 10 ~ 30 VDC
Consumption 1.4 W
Dimensions (w x l x h) 72 x 123 x 35 mm
Installation DIN-Rail or Wall Mounting
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -40 °C ~ +75 °C
Humidity 10 ~ 95% RH, Non-condensing
Mijn vraag gaat over: ICPDAS M-7060PD
To Top