ICPDAS High Performance USB to 2-port CAN bus Converter I-7565-H2

Levertijd:
2~7 dagen
SKU
I-7565-H2

High Performance Intelligent USB to CAN Converter

● Fully compliant with USB 1.1/2.0 (Full Speed)
● Fully compatible with the ISO 11898-2 standard
● Support both CAN2.0A and CAN2.0B
● No external power supply (powered by USB)
● Integrated with one or two CAN bus channels
● Programmable CAN bus baud rate from 5Kbps to 1Mbps or user-defined baud rate
● Support CAN bus acceptance filter configuration
● Time-stamp of CAN message with at least ±1ms precision
● Support firmware update via USB
● Provide API library for users' program development easily


I-7565-H1 and I-7565-H2 are the high performance intelligent USB to CAN converters with one and two CAN channels separately. They provide faster CAN bus communication performance than I-7565.

Both I-7565-H1 and I-7565-H2 support CAN2.0A/2.0B protocol and different baud rates from 5 Kbps to 1 Mbps. The important feature of I-7565-H1/H2 is to support the user-defined baud rate function no matter what the baud rate is.

When connecting I-7565-H1/H2 to PC, PC will load the relevant device driver automatically (hot plug & play). Therefore, users can make data collection and processing of CAN bus network easier and quicker by applying I-7565-H1/H2. The application fields can be CAN bus monitoring, building automation, remote data acquisition, environment control and monitoring, laboratory equipment & research, factory automation, etc.

The following is the application structure for these two USB/CAN modules. The PC can be the CAN host, monitor or HMI to access/control the CAN device through the CAN network by the I-7565-H1/H2 Converter. These modules let users to communicate with CAN devices easily from PC with USB interface.


(1) I-7565-H1: High Performance intelligent USB to 1- port CAN bus Converter.
(2) I-7565-H2: High Performance intelligent USB to 2- port CAN bus Converter.

Application of I-7565-H1/H2

 

 I-7565-H1 Application  I-7565-H2 Application







 

 

 

 

2500Vrms isolation on CAN side
The CAN port of I-7565-H1/H2 is isolated with 2500Vrms. This isolation can protect the local devices from the damage signal coming from CAN network.

 

Watchdog inside
The I-7565-H1/H2 Watchdog is a hardware reset circuit to monitor the operation status of I-7565-H1/H2. When working in a harsh or noisy environment, the I-7565-H1/H2 may be down by the external signal. The circuit may let the I-7565-H1/H2 work continuously and never halt.

 

Power / Communication / Error indicator display
There are three indicators on the I-7565-H1/H2.The power indicator can help user to check whether the I-7565-H1/H2 is standby. The communication indicator is used to show whether the I-7565-H1/H2 is transmitting/receiving messages. The Error indicator will be turned on when some errors occur on the I-7565-H1/H2.

 

APPLICATIONS
● Factory Automation
● Building Automation
● Home Automation
● Control System
● Monitor System
● Vehicle Automation

 

 

CAN UTILITY / API LIBRARY


● Provide CAN bus user-defined baud rate / acceptance filter configuration
● Easily transmit/receive CAN messages for testing and display the time-stamp of each received CAN message.
● Provide saving the CAN message as “TXT” file for data log.
● Provide sending CAN message by using the internal timer of module for high precision transmission.
● Check / Reset module status remotely and get current CAN bus message flow.
● Users can develop own program by API library quickly and easily.

 

Meer informatie
Art.nr.
I-7565-H2
Fabrikant
ICPDAS
Hardware
CAN Port Channels 2
CAN Interface
Controller Microprocessor inside with 72MHz
Transceiver NXP 82C250
Connector 10-pin terminal-block connector
Baud Rate (bps) 5K ~ 1Mbps or User-defined baud rate
Isolation
3000VDC for DC-to-DC
2500Vrms for photo-couple
Terminator Resistor Selectable 120Ω terminator resistor by jumper
Specification ISO-11898-2, CAN 2.0A and CAN 2.0B
Pin Assignment (CAN1: CAN_H=4, CAN_L=2 ) /
(CAN2: CAN_H=9, CAN_L=7 )
Receive Buffer 128 data frames for each CAN port
Max Data Flow 3000 fps (Total CAN ports)
USB Interface
Connector USB Type B
Transmission speed 12M kbps
Specification USB 1.1 and USB 2.0 standard
Receive Buffer 100 data frames
LED Indicators
Round LED PWR / RUN /ERR LED
Software
Driver
Windows 2K/XP, Linux
WinCE (available soon)
Power
Power supply By USB interface
Power Consumption 1.5 W
Dip Switch Init (Firmware Update) / Normal (Firmware Operation)
Mechanical
Dimensions (h x w x d) 108 x 72 x 35mm
Installation DIN-Rail
Omgeving
Operating Temperature -25 ~ 75 ℃
Storage Temperature -40 ~ 80 ℃
Humidity 5 ~ 95% RH, non-condensing
Mijn vraag gaat over: ICPDAS High Performance USB to 2-port CAN bus Converter I-7565-H2
U bent wellicht ook geïnteresseerd in de volgende producten:
To Top