2~7 dagen

8-channel Isolated Sink Type Open Collector Output and 8-channel Isolated Digital Input PoE Module

● Built-in Web Server for IF-THEN-ELSE rule setting
● Built-in IF-THEN-ELSE rule enigne for logic operation
● No more programming. Just click and get done!
● Support IO, Counter, Timer, Email operations
● Modbus/TCP Protocol for SCADA Software Seamless Integration
● IEEE 802.3af-compliant Power over Ethernet (PoE)
● 10/100 Base-TX Ethernet
● 2-way Isolation/ESD Protection
● DO Type: 8 Isolation Open Collector (Sink Type)
● DI Type: 8 Isolation Wet Contact (Sink/Source)

WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the effort and cost spent on system development.


ICPDAS WISE Module WISE-7144 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7144 will still be able to receive power from auxiliary power sources like AC adapters or battery.


This ICPDAS WISE Module WISE-7144 supports Modbus/TCP protocol to make seamless integration with SCADA software available. It features 8-channel isolated open collector outputs and 8-channel isolated wet contact digital inputs. Each output channel supports 300mA current driving +10 ~ 40 VDC and each digital input channel supports counter input.


● Building Automation
● Factory Automation
● Machine Automation
● Remote Maintenance
● Remote Diagnosis and Testing Equipment

Meer informatie
Digital Input
Input Channels 8
Input Type Wet Contact (Sink, Source)
On Voltage Level +10 VDC ~ +50 VDC
Off Voltage Level +4 VDC Max.
Input Impedance 10 kΩ
Max. Count 65535 (16 bits)
Max. Input Frequency 50 Hz
Min. Pulse Width 10 ms
Overvoltage Protection +70 VDC
Digital Output
Output Channels 8
Output Type Sink, Open Collector
Max Load Current 300 mA/Channel at 25 °C
Output Voltage +10 VDC ~ +40 VDC
Short Circuit Protection Yes
CPU 80186 CPU (80 MHz)
SRAM 512 kB
Flash Memory 512 kB
Dual Watchdog Yes
Communication Ports
PoE Ethernet Port 10/100 Base-TX (With Link, Activity LED Indicator) and Automatic MDI/MDI-X
2-Way Isolation
I/O 3750 Vrms
EMS Protection
ESD (IEC 61000-4-2) 4 kV Contact for each terminal
EFT (IEC 61000-4-4) ±2 kV for Power
LED Indicators
PoE PoE On
L1 Run
L2 Link/Act
L3 10/100 M
Reserve Polarity Protection Yes
Powered from terminal block Yes, 12 ~ 48 VDC
Powered from PoE Yes, IEEE 802.3af, Class 1
Consumption 4.3 W
Dimensions (w x h x d) 72 x 123 x 35 mm
Installation DIN-Rail or Wall mounting
Operating Temperature -25°C ~ +75 °C
Storage Temperature -30°C ~ +80 °C
Humidity 5 ~ 90% RH, non-condensing
Mijn vraag gaat over: ICPDAS WISE-7144
U bent wellicht ook geïnteresseerd in de volgende producten:
To Top