ICPDAS WISE-7126

Levertijd:
2~7 dagen
SKU
WISE-7126

6-channel Analog Inputs, 2-channel Analog Outputs, 2-channel Digital Inputs And 2-channel Digital Outputs PoE Module

● Built-in Web Server for IF-THEN-ELSE rule setting
● Built-in IF-THEN-ELSE rule enigne for logic operation
● No more programming. Just click and get done!
● Support IO, Counter, Timer, Email operations
● Modbus/TCP Protocol for SCADA Software Seamless Integration
● IEEE 802.3af-compliant Power over Ethernet (PoE)
● 10/100 Base-TX Ethernet
● AI: 6 (mV, V, mA)
● AO: 2 (V, mA)
● DO: 2 (Open Collector Output)
● DI: 2 (Dry+Wet)

WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the effort and cost spent on system development.

 

ICPDAS WISE Module WISE-7126 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7126 will still be able to receive power from auxiliary power sources like AC adapters or battery.

 

This multi-function module ICPDAS WISE Module WISE-7126 supports Modbus/TCP protocol to make seamless integration with SCADA software available. It features 6-channel analog inputs, 2-channel analog outputs, 2-channel digital inputs and 2-channel digital outputs. Each analog input channel provides 240 Vrms high overvoltage protection.



APPLICATIONS:

● Building Automation
● Factory Automation
● Machine Automation
● Remote Maintenance
● Remote Diagnosis and Testing Equipment

Meer informatie
Art.nr.
WISE-7126
Fabrikant
ICPDAS
Analog Input
Input Channels 6 (Differential)
Input Type ±500 mV, ±1 V, ±5 V, ±10 V
0 mA ~ +20 mA, ±20 mA, 4 ~ 20 mA (Jumper Selectable)
Resolution
Normal Mode 16-bit
Fast Mode 12-bit
Sampling Rate
Normal Mode 10 Samples/Sec.
Fast Mode 60 Samples/Sec. (Total)
Accuracy
Normal Mode ±0.1%
Fast Mode ±0.5% or better
Bandwidth
Normal Mode 15.7 Hz
Fast Mode 78.7 Hz
Zero Drift ±20 uV/°C
Span Drift ±25 ppm/°C
Input Impedance
Voltage 2 MΩ
Current 125 Ω
Common Mode Rejection 86 dB Min.
Normal Mode Rejection 100 dB
Open Wire for Current Output 4 ~ 20 mA
Overvoltage Protection 240 Vrms
ESD Protection
±4 kV (Contact for each channel)
±8 kV air for random point
EFT Protection ±4 kV for Power
Analog Output
Output Channels 2
Span Drift 0 V ~ +5 V, ±5 V, +0 V ~ +10 V,
±10 V, +0 mA ~ +20 mA, +4 mA ~ +20 mA (jumper selectable)
Resolution 12-bit
Accuracy ±0.1% of FSR
Voltage Output Capability 10 V@20 mA
Current Load Resistance 500 Ω
Power-Up and SafeValue Yes
Open Wire for Current Output 4 ~ 20 mA
Digital Input
Input Type 2 (Dry+Wet)
Dry Contact (Source)
On Voltage Level Close to GND
Off Voltage Level Open
Effective Distance for Dry Contact 500 m Max.
Wet Contact
On Voltage Level +1 VDC Max.
Off Voltage Level +3.5 VDC ~ +30 VDC
Counters
Channels 2
Max. Counts 16-bit (65535)
Max. Input Frequency 50 Hz
Min. Pulse Width 10 ms
Digital Output
Output Channels 2 (Sink)
Output Type Isolated Open Collector
Max Load Current 700 mA/Channel
Load Voltage +5 VDC ~ +50 VDC
External Power Reversed Protection and Short Circuit Protection Yes
Over-Temperature Protection Yes, 150 °C
Current Limited Protection 1.1 A
Systeem
CPU 80186 CPU (80 MHz)
SRAM 512 kKB
Flash Memory 512 kB
EEPROM 16 kB
Dual Watchdog Yes
Communication Ports
PoE Ethernet Port 10/100 Base-TX (With Link, Activity LED Indicator) and automatic MDI/MDI-X
2-Way Isolation
I/O 2500 VDC
EMS Protection
ESD (IEC 61000-4-2) 4 kV Contact for each terminal and 8 kV Air for random point
EFT (IEC 61000-4-4) ±4 kV for Power
LED Indicators
PoE PoE On
L1 Run
L2 Link/Act
L3 10/100 M
Power
Reserve Polarity Protection Yes
Powered from terminal block Yes, 12 ~ 48 VDC
Powered from PoE Yes, IEEE 802.3af, Class 1
Consumption 4.2 W
Mechanical
Dimensions (w x h x d) 72 x 123 x 35 mm
Installation DIN-Rail or Wall Mounting
Omgeving
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -30 °C ~ +80 °C
Humidity 5 ~ 90% RH, non-condensing
Mijn vraag gaat over: ICPDAS WISE-7126
U bent wellicht ook geïnteresseerd in de volgende producten:
To Top