2~7 dagen

Intelligent RS-232/CAN low speed fault tolerant converter

● Compatible with CAN specification 2.0A and 2.0B
● Fully compatible with ISO 11898-2 standard
● Support various bauds from 10K bps to 1M bps
● Fully compatible with ISO 11898-3 standard (low speed fault tolerance)
● Software configurable CAN and RS-232 communication parameters
● Power, data flow and error indicator for CAN and RS-232
● Watchdog inside
● Support transparent communication mode
● 1000 frames in CAN received buffer and 900 frames in RS-232 received buffer


In pair connection mode, I-7530FT can be used to connect PC with other RS-232 devices at the same time. I-7530 can also enable programmable RS-232 devices such as PC's, I-8411/I-8431/I-8811/I-8831 embedded controllers to be the master of a CAN network.


● Control System
● Building Automation
● Factory Automation
● Distributed Data Acquisition


Meer informatie
CAN Interface
Controller Microprocessor inside with 20MHz
Transceiver AMIS 41682
Channel Number 1
Connector 9-pin male D-Sub (CAN_L, CAN_SHLD, CAN_H, N/A for others)
Baud Rate (bps) 10 k, 20 k, 50 k, 125 kbps
Isolation None
Terminator Resistor 1 kΩ for CAN_H and CAN_L
Specification ISO-11898-3 (low speed fault tolerance), CAN 2.0A and CAN 2.0B
Receive Buffer 1000 data frames
RS-232 Interface
Connector 9-pin female D-Sub (TxD, RxD, GND, N/A for others)
Baud Rate (bps) 110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200bps
Data Bit 5, 6, 7, 8
Stop Bit 1, 2
Parity Bit None, Even, Odd
Receive Buffer 900 data frames
LED Indicators
Round LED
ON LED Power and Data Flow
ERR LED Error Status
Protection Power reverse polarity protection, Overvoltage brownout protection
Power Consumption 1W
Installation DIN-Rail Mounting
Dimensions (w x l x h) 72 x 123 x 25mm
Operation Temperature -25 °C ~ 75 °C
Storage Temperature -40 °C ~ 80 °C
Humidity 5 ~ 95% RH, non-condensing
Mijn vraag gaat over: ICPDAS I-7530-FT
U bent wellicht ook geïnteresseerd in de volgende producten:
To Top