Wij gebruiken cookies om uw ervaring beter te maken. Om te voldoen aan de cookie wetgeving, vragen we uw toestemming om de cookies te plaatsen. Meer informatie.
ICPDAS I-7530A
Levertijd:
Uit voorraad leverbaar
SKU
I-7530A
Intelligent RS-232/485/422 to CAN converter
● Compatible with CAN specification 2.0A and B
● Fully compatible with ISO 11898-2 standard
● Support various bauds from 10K bps to 1M bps
● Jumper for 120 Ω terminator resistor
● Software configurable CAN and RS-232 /422/485 communication parameters
● Power, data flow and error indicator for CAN and RS-232/422/485
● Watchdog inside
● Provide the transparent communication between the RS-232/485/422 devices via CAN bus
● Enable different RS-232/485/422 devices into an individual group in CAN bus network.
(Full-duplex communication mode of RS-232/422 devices is not supported)
CAN (Controller Area Network) is a serial bus system especially suited to structure intelligent industry devices networks and build smart automatic control systems.
The following figure shows the application architecture for I-7530A modules. The PC can be the CAN host, monitor or HMI to access/control the CAN device through the CAN network by the I-7530A Converter. The programmable RS-232/485/422 device (For example: I-8411/I-8431/I-8811/I-8831/W-8031/W-8331/W-8731 embedded controller) can use the serial port to connect to the CAN network via the I-7530A module.
In order to use the CAN network with traditional RS-232/485/422 devices, we provide a way to achieve this purpose. The I-7530A is designed to unleash the power of CAN bus via RS-232/485/422 communication method. It accurately converts messages between CAN and RS-232/485/422 networks. This module let you to communicate with CAN devices easily from any PC or devices with RS-232/485/422 interface.
Moreover, we expand the functionalities of I-7530A for some special application. In pair connection mode, I-7530A can be used to connect PC with other RS-232/485/422 devices at the same time. The application architecture may be as follows.
3000V isolation on CAN side
The CAN port of I-7530A is an isolated with 3000V isolation. This isolation can protect the local RS-232/485/422 devices from the damage signal coming from CAN network.
Watchdog inside
The I-7530A Watchdog is a hardware reset circuit to monitor the I-7530A’s operation status. When working in harsh or noisy environment, the I-7530A may be down by the external signal. The circuit may let the I-7530A to work continuously and never halt. Power and Error indicator display
There are two indicators on the I-7530A.The power indicator can help user to check whether the I-7530A is standby or transmitting/receiving messages. The Error indicator will be turned on when some errors occur on the I-7530A.
APPLICATIONS:
● Control System
● Building Automation
● Factory Automation
● Distributed Data Acquisition
Meer informatie
Art.nr.
I-7530A
Fabrikant
ICPDAS
CAN Interface
| Controller | Microprocessor inside with 20MHz |
| Transceiver | NXP 82C250 |
| Connector | 9-pin male D-Sub (CAN_L, CAN_SHLD, CAN_H, N/A for others) |
| Port Channels | 1 |
| Baud Rate | 10k, 20k, 50k, 100k, 125k, 250k, 500k, 800k and 1Mbps |
| Protection | 3000V DC power protection on CAN side, 2500 vrms photo-couple isolation on CAN bus |
| Terminator Resistor | Selectable 120Ω terminator resistor by jumper |
| Support Protocol | CAN 2.0A/2.0B |
| Receive Buffer | 1000 data frames |
UART Interface
| COM | RS-232, RS-485, RS-422 | ||||
| Connector |
|
||||
| Baud Rate | 110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps | ||||
| Data Bits | 5, 6, 7, 8 | ||||
| Stop Bits | 1,2 | ||||
| Parity | None, Even, Odd | ||||
| Receive Buffer | 900 data frames |
LED Indicators
| ON LED | Power and Data Flow |
| ERR LED | Error |
Power
| Power Consumption | 1W |
| Power Requirement | Unregulated +10V DC ~ +30V DC. Power reverse protection, Overvoltage brown-out protection |
Mechanical
| Installation | DIN-Rail Mounting |
| Dimensions (w x l x h) | 72 x 123 x 25mm |
Omgeving
| Operation Temperature | -25 °C ~ 75 °C |
| Storage Temperature | -40 °C ~ 80 °C |
| Humidity | 5 ~ 95% non-condensing |
U bent wellicht ook geïnteresseerd in de volgende producten:
