CAN2000D Series

 

Desc
per pagina

12 producten

  1. CAN-2026C

    6-ch Analog Input, 2-ch Analog Output, 2-ch Digital Input and 1-ch Digital Output CANopen Slave Module

    ● I/O Channels: 6AI, 2AO, 2DI and 1DO
    ● Analog Input Type: +/-150mV, +/-500 mV, +/-1V, +/-5 V, +/-10 V +/-20 mA, 0 ~ 20 mA, 4 ~ 20 mA (Current measurement with external 125Ω resistor required )
    ● Analog Output Type: +0 V ~ +5 V, +/-5 V, +0 V ~ +10 V, +/-10 V
    ● Analog Input sample rate: 60 Samples/Sec. (Total)
    ● Digital Input Type: Sink
    ● Digital Output Type: Sink
    ● Analog Input Resolution: 16-bit
    ● Analog Input Accuracy: +/-0.1% FSR
    ● Analog Output Resolution: 12-bit
    ● Analog Output Accuracy: +/-0.1% FSR
    ● ESD Protection: +/- 4kV, Contact for each terminal
    ● Intra-module Isolation: Field to logic 3000 VDC

     

  2. Isolated 6-ch DI and 6-ch Relay Output EtherNet/IP I/O module

    Isolated 6-ch DI and 6-ch Relay Output EtherNet/IP I/O module

    ● Transfer protocol: EtherNet/IP
    ● Powerful 32-bit MCU handles efficient network traffic
    ● 10/100 Base-TX Ethernet, RJ-45 x 2 (Auto-negotiating, auto MDI/MDIX, LED Indicators)
    ● Support ARP,TCP, UDP, ICMP, DHCP, BOOTP and TFTP protocols
    ● Easy firmware update via Ethernet
    ● Removable terminal block connector
    ● RoHS compliant with Halogen-free
    ● LED display to indicate the I/O status



  3. DeviceNet Slave Module of 8-channel thermocouple input

    DeviceNet Slave Module of 8-channel thermocouple input

    ● DeviceNet general I/O slave devices
    ● Comply with DeviceNet specification Volume I,
    ● Release 2.0 & Volume II, Release 2.0, Errata 5
    ● Group 2 Only Server (non UCMM-capable)
    ● Support Predefined Master/Slave Connection Set
    ● Connection supported:
    ● 1 connection for Explicit Messaging
    ● 1 connection for Polled I/O
    ● 1 connection for Bit-Strobe I/O connection
    ● Support DeviceNet heartbeat and shutdown messages
    ● Provide EDS file for DeviceNet master interface



  4. 8-channel isolated sink/source digital input and 8-channel isolated open-collector digital output module

    8-channel isolated sink/source digital input and 8-channel isolated open-collector digital output module

    ● DeviceNet general I/O slave devices
    ● Comply with DeviceNet specification Volume I, Release 2.0 & Volume II, Release 2.0, Errata 5
    ● Group 2 Only Server (non UCMM-capable)
    ● Support Predefined Master/Slave Connection Set
    ● Connection supported (1 connection for Explicit Messaging, 1 connection for Polled I/O, 1 connection for Bit-Strobe I/O connection)
    ● Support DeviceNet heartbeat and shutdown messages
    ● Provide EDS file for DeviceNet master interface

  5. DeviceNet Module of 16-channel Isolated Open Collector Digital Output

    DeviceNet Module of 16-channel Isolated Open Collector Digital Output

    ● DeviceNet general I/O slave devices
    ● Group 2 Only Server (non UCMM-capable)
    ● Support Predefined Master/Slave Connection Set
    ● Connection supported (1 connection for Explicit Messaging, 1 connection for Polled I/O, 1 connection for Bit-Strobe I/O connection)
    ● Support DeviceNet heartbeat and shutdown messages
    ● Provide EDS file for DeviceNet master interface
    ● Support Application: Drive Relay, Resistance Load
    ● ESD Protection 4 kV Contact for each channel

     

  6. DeviceNet Module of 16-channel Isolated Sink/Source Digital Input

    DeviceNet Module of 16-channel Isolated Sink/Source Digital Input

    ● DeviceNet general I/O slave devices
    ● Group 2 Only Server (non UCMM-capable)
    ● Support Predefined Master/Slave Connection Set
    ● Connection supported (1 connection for Explicit Messaging, 1 connection for Polled I/O, 1 connection for Bit-Strobe I/O connection)
    ● Provide EDS file for DeviceNet master interface
    ● Support Application: PNP, NPN, TTL, and Relay Contact
    ● ESD Protection 4 kV Contact for each channel

     

  7. DeviceNet Slave Module of 8-Channel PWM and 8-Channel High Speed Counter

    CAN bus Remote I/O module with CANopen Protocol of 8-Channel PWM and 8-Channel High Speed Counter

    ● Hardware-controlled PWM output
    ● PWM output frequency: 0.2 Hz ~ 500 kHz with 0.1%~99.9% duty cycle
    ● PWM Output Modes: software trigger / hardware trigger
    ● Trigger each PWM output individually or all PWM outputs synchronously
    ● Support Burst output mode and Continue output mode
    ● Provide 32-bit 500 kHz high-speed counter for each DI channel
    ● Pass the validation of DeviceNet conformance test
    ● Provide EDS file for DeviceNet master interface

Desc
per pagina

12 producten

To Top