ICPDAS CANopen module of 4-channel 14-bit analog output module - CAN-2024C

Levertijd:
2~7 dagen
SKU
CAN-2024C

CANopen module of 4-channel 14-bit analog output module

● NMT Slave
● Read-Back Accuracy ±1% of FSR
● Provide default EDS file
● ESD Protection 4 kV Contact for each channel
● Support Power Supply +10 VDC ~ +30 VDC
● Support CiA DS-301 v4.02, DSP-401 v2.1
● Support PDO Mapping

CANopen is one kind of the network protocols based on the CAN bus and mainly used for embedded network system, such as industrial machine control , vehicle control system, factory automation, medical equipments control, remote data acquisition, environmental monitoring, and packaging machines control, etc.

The CAN-2024C module follows the CiA DS-301 version 4.02 and DSP-401 version 2.1. It is easy to access the analogue I/O status and set the configuration by using the standard CANopen protocol. The CAN-2024C has passed the validation of the CiA CANopen Conformance Test tool. Therefore, the provided EDS file is standard for any other standard CANopen masters.

Owing to the 4-channel analog output and the CANopen masters of ICP DAS, you can quickly build a CANopen network to approach your requirements. For more information about the CANopen master interfaces and other CANopen products, please refer to the following web site.

 

APPLICATIONS:

https://fieldworks.nl/media/imageproducts/icpdas/CAN-2024C.jpg

Meer informatie
Art.nr.
CAN-2024C
Fabrikant
ICPDAS
CANopen Interface
NMT Slave
Error Control Node Guarding protocol or Heartbeat Consumer
No. of PDOs 10Rx , 10Tx
PDO Modes Event Triggered, Remotely requested, Cyclic and acyclic SYNC
PDO Mapping Available
No. of SDOs 1 server, 0 client
Emergency Message Yes
CANopen Version DS-301 v4.02
Device Profile DSP-401 v2.1
Specification ISO 11898-2, CAN 2.0A
Baud Rate (bps) 10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, and 1 M
Node ID 1 ~ 99
Terminator Resistor Switch of 120 Ω terminator resistor
Connector 5-pin screwed terminal block (CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+)
EDS file Yes
Analog Output
Output Channels 4
Output Type 0~ 5 V, ± 5 V, 0~ 10 V, ± 10 V, 0 ~ 20 mA, 4 ~ 20 mA
Resolution 14-bit
Accuracy ± 0.1 % of FSR for voltage output ; ± 0.2 % of FSR for current output
Zero Drift
Voltage ±30μV/°C
Current ±0.2μV/°C
Span Drift ±20ppm/°C
Voltage Output Capability 10V@5mA
Current Load Resistance External +24 V: 1050 Ω
Power-Up and Safe Value Yes
Intra-module Isolation, Field to Logic 3000 VDC
LED Indicators
CANopen Status 3 LEDs to PWR, RUN and ERR
Terminal Resister 1 LED to terminator resister indicators
Power
Power Supply Unregulated +10 ~ +30 VDC
Power Consumption 1.5 W
Mechanical
Installation DIN-Rail
Dimensions (w x l x h) 32.5 x 110 x 102mm
Omgeving
ESD Protection 4 kV Contact for each channel
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -30 °C ~ +80 °C
Humidity 10 ~ 90% RH, non-condensing
Mijn vraag gaat over: ICPDAS CANopen module of 4-channel 14-bit analog output module - CAN-2024C
U bent wellicht ook geïnteresseerd in de volgende producten:
To Top