ICPDAS EIP-2060
Isolated 6-ch DI and 6-ch Relay Output EtherNet/IP I/O module
● Transfer protocol: EtherNet/IP
● Powerful 32-bit MCU handles efficient network traffic
● 10/100 Base-TX Ethernet, RJ-45 x 2 (Auto-negotiating, auto MDI/MDIX, LED Indicators)
● Support ARP,TCP, UDP, ICMP, DHCP, BOOTP and TFTP protocols
● Easy firmware update via Ethernet
● Removable terminal block connector
● RoHS compliant with Halogen-free
● LED display to indicate the I/O status
The EIP-2000 is an Industrial EtherNet/IP Remote I/O module series. It is equipped with the EtherNet/IP protocol, and allows daisy chain connection, making it possible to transfer data much faster during process control and other industrial automation applications.
Daisy chain connectivity provides a more scalable system with fewer wires to help avoid interference common in factory settings. Otherwise, ICPDAS also provides Utility, It allows user to configure and test the EIP-2000 modules through Ethernet. The EIP-2060 is one of the EIP-2000 Industrial EtherNet/IP Remote I/O module series. It provides 6 digital input and 6 relay output. The digital I/O of EIP-2060 supports built-in I/O functions such as DI counter and DO safe value…etc.
|
Channels |
8 |
| Input Type | Dry Contact: Source, Wet Contact: Sink / Source |
| Dry Contact Level | Off Voltage Level: Open On Voltage Level: Close to GND |
| Wet Contact Level | Off Voltage Level: +4V max. On Voltage Level: +10 V ~ +50 V |
|
Counters |
Channels: 6 Max. counts: 32-bit (4294967295) Max. Input Frequency: 5KHz |
| Photo-Isolation |
3750 VDC |
|
Channels |
8 |
| Output Type | Form A (SPST-NO) |
| Contact Rating (Resistive Load) | 5A 250VAC (47~63Hz) 5A 30 VDC |
| Operate Time |
10ms max. |
|
Release Time |
5ms max. |
| Insulation Resistance |
1,000MΩs at 500 VDC |
| Dielectric Strength | Between Open Contact: 1000VAC (1 min.) Between Coil and Contacts: 3000VAC (1 min.) |
| Endurance | Mechanical: 20,000,000 times min. Electrical: 100,000 times min. |
| Input Voltage Range | 10 V ~ 30 V |
| Power Consumption | 1.6 W |
| Installation | DIN-Rail |
| Dimensions (w x l x h) | 110mm x 90mm x 33mm |
| Operating Temperature | -25 °C ~ +75 °C |
| Storage Temperature | -30 °C ~ +80 °C |
| Humidity | 10 ~ 90% RH, non-condensing |
