Ga naar het einde van de afbeeldingen-gallerij

Ga naar het begin van de afbeeldingen-gallerij

ICPDAS MDR-60-48

Levertijd:

2~7 dagen

SKU

MDR-60-48

48 V/1.25 A, 60 W Single Output Industrial DIN-Rail Power Supply

● Universal AC input/Full range
● Protections: Short circuit / Overload / Overvoltage
● Cooling by free air convection
● Can be installed on DIN-Rail TS-35/7.5 or 15
● NEC class 2 / LPS compliant (48V only)
● LED indicator for power on
● DC OK relay contact
● No load power consumption <0.75 W
● 100% full load burn-in test

Details

Notes:

1. All parameters NOT specially mentioned are measured at 230 VAC input, rated load and 25 of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47 uf parallel capacitor.

3. Tolerance: includes set up tolerance, line regulation and load regulation.

4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

5. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.

SPECIFICATIES

Meer informatie

Art.nr.

MDR-60-48

Fabrikant

ICPDAS

Input

Voltage Range

85 ~ 264 VAC

120 ~ 370 VDC

Frequency Range

47 ~ 63 Hz

Efficiency (Typical)

87%

AC Current (Typical)

1.8 A/115 VAC

1 A/230 VAC

Inrush Current (Typical)

Cold Start 30 A/115 VAC

60 A/230 VAC

Leakage Current

<1 mA / 240 VAC

Output

DC Voltage

48 V

Rated Current

1.25 A

Current Range

0 ~ 1.25 A

Rated Power

60 W

Ripple & Noise (max.)

200 mVp-p

Voltage ADJ range

48 ~ 56 V

Voltage Tolerance

±1.0%

Line Regulation

±1.0%

Load Regulation

±1.0%

Setup, Rise Time

500 ms, 30 ms/230 VAC

500 ms, 30 ms/115 VAC at full load

Protection

Overload

105 ~ 150% rated output power

Protection type : Constant current limiting, recovers automatically after fault condition is removed

Overvoltage

57.6 ~ 64.8 V

Protection type : Shut down o/p voltage, re-power on to recover

Function

DC OK Signal

Relay contact rating (max.): 30 V/1 A resistive

Safety & EMC

Safety Standards

UL508, TUV EN60950-1 approved, NEC class 2 / LPS compliant (24V,48V only)

Withstand Voltage

I/P-O/P	3 KVAC
I/P-FG	1.5 KVAC
O/P-FG	0.5KVAC

Isolation Resistance

I/P-O/P	>100 MΩ / 500 VDC 25 °C 70% RH
I/P-FG
O/P-FG

EMI Conduction & Radiation

Compliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B

Harmonic Current

Compliance to EN61000-3-2,-3

EMS Immunity

Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, ENV50204, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A

DC OK Relay Contact

Contact Close	When the output voltage reaches the adjusted output voltage.
Contact Open	When the output voltage drop below 90% output voltage.
Contact Ratings (max.)	30V/1A resistive load

Algemeen

MTBF

299.2K hrs min.

MIL-HDBK-217F (25 °C)

Omgeving

Operating Temperature

-20 °C ~ +70 °C (Refer to output load derating curve)

Operating Humidity

20 ~ 90% RH non-condensing

Storage Temperature

-40 °C ~ +85 °C

Storage Humidity