Wij gebruiken cookies om uw ervaring beter te maken. Om te voldoen aan de cookie wetgeving, vragen we uw toestemming om de cookies te plaatsen. Meer informatie.
ICPDAS NSM-209FT
Levertijd:
2~7 dagen
SKU
NSM-209FT
Unmanaged 8-Port Industrial 10/100 Base-T with 100 Base-FX Fiber Switch
● Automatic MDI / MDI-X crossover for plug-and-play
● Each port supports both 10/100 Mbps speed auto negotiation
● Store-and-forward architecture
● Full duplex IEEE 802.3x and half duplex backpressure flow control
● 3.2 Gbps high performance memory bandwidth
● Redundant Power Inputs +10 ~ +30V DC
Power failure alarm by relay output
● Supports operating temperatures from 0 ~ +70°C
● IP20, rugged high-strength metal case
● DIN-Rail mountable for industrial usage
The NSM-209FT (ST Connector; Multi-mode) is a Unmanaged 8-Port Industrial Ethernet (10/100Base-TX) with Fiber (100Base-FX) Switch that secures data transmission by using fiber optic transmission to provide immunity from EMI/RFI interference. It is used Ethernet for transmitting a signal up to 2 Km, and is the perfect solution for applications where transmission must be protected from electrical exposure, surges, lightning or chemical corrosion.
The NSM-209FT operates at either half or full duplex mode. In full duplex mode, range is 2km with 62.5/ 125μm fiber cables; in half duplex mode, range is 412m with 62.5/ 125μm fiber cables.
The Ethernet supports 10/ 100M auto-negotiation feature and auto MDI /MDIX function.
NSM-209FT provides two power inputs that can be connected simultaneously to live DC power sources. If one of the power inputs fails, the other live source acts as a backup to automatically support the NSM-209FT's power needs.
Meer informatie
Art.nr.
NSM-209FT
Fabrikant
ICPDAS
Technology
| Standards | IEEE802.3, 802.3u, 802.3x |
| Processing Type | Store & forward wire speed switching - no delays |
| MAC Addresses | 1024 |
| Memory Bandwidth | 3.2 Gbps |
| Flow Control | IEEE802.3x flow control, back pressure flow control |
Interface
| RJ45 port | 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDIX connection |
||||||
| Fiber Optic port | 100 Base-FX (Multi-mode; ST connector) | ||||||
| LED Indicators | 10/100M, Link/Act, Full duplex/Half duplex (Fiber Port) | ||||||
| Ethernet Isolation | 1500Vrms 1 minute | ||||||
| Frame Ground for EMS Protection | Yes | ||||||
| Fiber Optic |
|
||||||
| Ethernet Transmission Distance |
|
Power
| Redundant Input Range | +10 ~ +30VDC (Non-isolation) |
| Alarm Contact | One relay output with current carrying capacity of 2A @ 30 VDC |
| Power consumption | 0.17A@24VDC, ± 5% arrowed with 100M Full duplex |
| LED Indicators | Power input1, Power input2, Power fail |
| Protection | Power reverse polarity protection |
| Frame Ground for EMS Protection | Yes |
| Connection | 7-Pin Removable Terminal Block |
Mechanical
| Case | Metal |
| Environmental rating | IP20 |
| Dimensions (w x h x d) | 72.5 x 110 x 102mm |
| Installation | DIN-Rail mount; Wall Mounting |
Environmental
| Operating Temperature | 0 ~ +70°C |
| Storage Temperature | -20 ~ +85°C |
| Humidity | 10% to 90% non-condensing |
Gerelateerde producten
U bent wellicht ook geïnteresseerd in de volgende producten:
