ICPDAS NSM-209FC
Unmanaged 8-Port Industrial 10/100 Base-T with 100 Base-FX Fiber Switch
● Automatic MDI / MDI-X crossover for plug-and-play
● Each port supports both 10/100 Mbps speed auto negotiation
● Store-and-forward architecture
● Full duplex IEEE 802.3x and half duplex backpressure flow control
● 3.2 Gbps high performance memory bandwidth
● Redundant Power Inputs +10 ~ +30 VDC
Power failure alarm by relay output
● Supports operating temperatures from 0 °C ~ +70 °C
● IP20, rugged high-strength metal case
● DIN-Rail mount for industrial usage
The NSM-209FC (SC Connector; Multi-mode) is a Unmanaged 8-Port Industrial Ethernet (10/100Base-TX) with Fiber (100Base-FX) Switch that secures data transmission by using fiber optic transmission to provide immunity from EMI/RFI interference. It is used Ethernet for transmitting a signal up to 2 Km(6,600 ft), and is the perfect solution for applications where transmission must be protected from electrical exposure, surges, lightning or chemical corrosion.
The NSM-209FC operates at either half or full duplex mode. In full duplex mode, range is 2km with 62.5/ 125μm fiber cables; in half duplex mode, range is 412m with 62.5/ 125μm fiber cables.
The Ethernet supports 10/ 100M auto-negotiation feature and auto MDI /MDIX function.
NSM-209FC provides two power inputs that can be connected simultaneously to live DC power sources. If one of the power inputs fails, the other live source acts as a backup to automatically support the NSM-209FC's power needs.
| Standards | IEEE802.3, 802.3u, 802.3x |
| Processing Type | Store & forward wire speed switching - no delays |
| MAC Addresses | 1024 |
| Memory Bandwidth | 3.2 Gbps |
| Flow Control | IEEE802.3x flow control, back pressure flow control |
| RJ45 port | 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDIX connection |
||||||
| Fiber Optic port | 100 Base-FX (Multi-mode; SC connector) | ||||||
| LED Indicators | 10/100M, Link/Act, Full duplex/Half duplex (Fiber Port) | ||||||
| Ethernet Isolation | 1500Vrms 1 minute | ||||||
| Frame Ground for EMS Protection | Yes | ||||||
| Fiber Optic |
|
||||||
| Ethernet Transmission Distance |
|
| Redundant Input Range | +10 ~ +30VDC (Non-isolation) |
| Alarm Contact | One relay output with current carrying capacity of 2A @ 30 VDC |
| Power consumption | 0.17A@24VDC, ± 5% arrowed with 100M Full duplex |
| LED Indicators | Power input1, Power input2, Power fail |
| Protection | Power reverse polarity protection |
| Frame Ground for EMS Protection | Yes |
| Connection | 7-Pin Removable Terminal Block |
| Case | Metal |
| Environmental rating | IP20 |
| Dimensions (w x h x d) | 72.5 x 110 x 102mm |
| Installation | DIN-Rail mount; Wall Mounting |
| Operating Temperature | 0 ~ +70°C |
| Storage Temperature | -20 ~ +85°C |
| Humidity | 10% to 90% non-condensing |
