2~7 dagen

10/20-channel Analog Input Module with High Voltage Protection

● 3000 VDC Isolated analog input.
● 24-bits sigma-delta ADC to provide excellent accuracy.
● Software calibration
● Dual Watchdog

I-7000 is a family of network data acquisition and control modules. They provide analog-to-digital, digital-to-analog, digital input/output, timer/counter and other functions. These modules can be remote controlled by a set of commands. The common features of analog input modules are given as follows:

The I-7017Z is an 10/20-channel Analog Input Module with High Voltage Protection.

Meer informatie
Analog Input
Input Channels 10 differential or 20 single-ended (Voltage Inputs Only, Note1), software selectable
Input Type
±500 mV, ±1 V, ±5 V, ±10 V
±20 mA ,0 ~ 20 mA, 4 ~ 20 mA (jumper selectable)
Resolution 16-bit (Normal Mode) / 12-bit (Fast Mode)
Sampling Rate 10 samples/sec (Normal Mode) / 60 samples/sec (Fast Mode) total
Accuracy ±0.1% (Normal Mode) / ±0.5% (Fast Mode) or better
Bandwidth 15.7 Hz (Normal Mode) / 78.7 Hz (Fast Mode)
Zero Drift ±20 uV/°C
Span Drift ±25 ppm/°C
Input Impedance* Voltage: 2 MΩ (Differential), 1 MΩ (Single-ended)/Current: 125 Ω
Common Mode Rejection 86 dB min.
Normal Mode Rejection 100 dB
Overvoltage Protection Differential: 240 Vrms, Single-ended: 150 Vrms
ESD Protection 4 kV Contact for each terminal, and 8 kKV Air for random point
EFT Protection 4 kV to Power, and 1 kV to RS-485
Individual Channel Configuration Yes
Intra-module Isolation, Field to Logic 3000 VDC
* Differential mode can be used for voltage input and current input.
Single-Ended mode can be used for voltage input only.
Interface RS-485
Format N, 8, 1
Baud Rate 1200 ~ 115200 bps
LED Indicators
LED Power/Communication
Input +10 VDC ~ +30 VDC
Power Consumption 2.0 W
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -40 °C ~ +85 °C
Humidity 5 ~ 95% RH, non-condensing
Mijn vraag gaat over: ICPDAS I-7017Z
To Top