Dataforth
Dataforth's nieuwe SensorLex® 8B-reeks is een serie geïsoleerde signaalconditioneringsmodules die zijn ontworpen om nauwkeurige en betrouwbare metingen en isolatiemogelijkheden te bieden voor diverse industriële toepassingen. Deze modules zijn bijzonder nuttig in omgevingen waar signaalisolatie cruciaal is om ruis, aardlussen en andere interferentieproblemen te voorkomen.
De SensorLex® 8B-modules bieden functies zoals:
1. Isolatie: Ze bieden galvanische isolatie tussen ingangs- en uitgangssignalen, waardoor het gemeten signaal onaangetast blijft door externe factoren en storingen.
2. Signaalconditionering: Deze modules kunnen verschillende signaalconditioneringfuncties uitvoeren, zoals versterking, filtering, linearisatie en conversie, om nauwkeurige metingen te garanderen en compatibiliteit te bieden met verschillende soorten sensoren.
3. Hoge nauwkeurigheid: Dataforth staat bekend om het produceren van hoogwaardige instrumentatie, en de SensorLex® 8B-modules handhaven deze standaard met nauwkeurige meetmogelijkheden, waardoor betrouwbare gegevens worden verkregen voor procesbeheer- en monitoringsapplicaties.
4. Flexibiliteit: De 8B-reeks biedt flexibiliteit qua typen ingangen, uitvoeropties en communicatieinterfaces, waardoor gebruikers de module kunnen kiezen die het beste aansluit bij hun specifieke toepassingseisen.
5. Compact ontwerp: Deze modules zijn doorgaans compact en kunnen op DIN-rail worden gemonteerd, waardoor ze geschikt zijn voor integratie in diverse industriële besturingssystemen en omgevingen.
Over het algemeen biedt Dataforth's SensorLex® 8B-reeks een robuuste oplossing voor signaalconditionering- en isolatiebehoeften in industriële omgevingen, waardoor nauwkeurige en betrouwbare gegevensacquisitie wordt gegarandeerd voor kritische processen en systemen.
Signal Conditioning Module DI-8B30DI-8B30 Analog Voltage Input Module 3 Hz Bandwidth (±10 mV ~ ±100 mV Input Range)
● Accepts Millivolt Level Signals
● High Level Voltage Outputs
● 1500 Vrms Transformer Isolation
● ANSI/IEEE C37.90.1 Transient Protection
● Input Protected up to 240VAC Continuous
● 120 dB CMR
● 85 dB NMR at 60 Hz
● ±0.05% Accuracy
● ±0.02% Linearity
● Low Drift with Ambient Temperature
● CSA, FM and CE Certifications Pending
● Mix and Match Modules
Signal Conditioning Module DI-8B31DI-8B31 Analog Voltage Input Module 3 Hz Bandwidth (±1 V ~ ±60 V Input Range)
● Accepts Millivolt Level Signals
● High Level Voltage Outputs
● 1500 Vrms Transformer Isolation
● ANSI/IEEE C37.90.1 Transient Protection
● Input Protected up to 240 VAC Continuous
● 120 dB CMR
● 85 dB NMR at 60 Hz
● ±0.05% Accuracy
● ±0.02% Linearity
● Low Drift with Ambient Temperature
● CSA, FM and CE Certifications Pending
● Mix and Match Modules
Signal Conditioning Module DI-8B33DI-8B33 Isolated True RMS Input Module (100 mV ~ 300 V RMS Input Range)
● Interfaces RMS Voltage (100 mV to 300 V)
● Designed For Standard Operation With Frequencies of 45 Hz ~ 1 kHz (Extended Range to 20 kHz)
● Compatible With Standard Current and Potential Transformers
● ±0.25% Factory Calibrated Accuracy (Accuracy Class 0.2)
● 1500 Vrms Continuous Transformer Based Isolation
● Input Overload Protected to 480 V Max (Peak AC and DC) or 10A RMS Continuous
● ANSI/IEEE C37.90.1-1989 Transient Protection
Signal Conditioning Module DI-8B34DI-8B34 Linearized 2- or 3-wire RTD Input Module
● Interfaces to 100Ω Platinum RTDs
● Linearizes RTD Signal
● High Level Voltage Outputs
● 1500 Vrms Transformer Isolation
● ANSI/IEEE C37.90.1 Transient Protection
● Input Protected to 240 VAC Continuous
● 120 dB CMR
● 70 dB NMR at 60 Hz
● Low Drift with Ambient Temperature
● CSA, FM and CE Certifications Pending
● Mix and Match Modules
Signal Conditioning Module DI-8B35DI-8B35 Linearized 4-wire RTD Input Module
● Interfaces to 100 Ω Platinum RTDs
● Linearizes RTD Signal
● High Level Voltage Outputs
● 1500 Vrms Transformer Isolation
● ANSI/IEEE C37.90.1 Transient Protection
● Input Protected to 240 VAC Continuous
● 120 dB CMR
● 70 dB NMR at 60 Hz
● Low Drift with Ambient Temperature
● CSA, FM and CE Certifications Pending
● Mix and Match Module Types
Signal Conditioning Module DI-8B36DI-8B36 Potentiometer Input Module (0 ~ 10 kΩ Input Range)
● Interfaces to Potentiometers up to 10,000 Ω
● High Level Voltage Outputs
● 1500 Vrms Transformer Isolation
● ANSI/IEEE C37.90.1 Transient Protection
● Input Protected to 240VAC Continuous
● 120 dB CMR
● 70 dB NMR at 60 Hz
● ±0.05% Accuracy
● ±0.02% Linearity
● Low Drift with Ambient Temperature
● CSA, FM and CE Certifications Pending
● Mix and Match Modules
Signal Conditioning Module DI-8B38DI-8B38 Strain Gage Input Module (Wide (8 kHz) and Narrow (3 Hz) Bandwidth)
● Provides gain and excitation for strain gage-based transducers (load cells, pressure sensors, torque meters, etc.)
● Interfaces to 100 Ω Thru 2 kΩ Full-Bridge Strain Gages (model dependent)
● High Level Voltage Outputs
● 1500 Vrms Transformer Isolation
● ANSI/IEEE C37.90.1 Transient Protection
● Input Protected up to 240 VAC Continuous
● 100 dB CMR
● 3 Hz or 8 kHz Signal Bandwidth
● ±0.05% Accuracy
● ±0.02% Linearity
● Low Drift with Ambient Temperature
● UL, CSA, FM and CE Certifications Pending
● Mix and Match Modules
Signal Conditioning Module DI-8B38-02DI-8B38 Strain Gage Input Module (Wide (8kHz) and Narrow (3Hz) Bandwidth)
● Provides gain and excitation for strain gage-based transducers (load cells, pressure sensors, torque meters, etc.)
● Interfaces to 100Ω Thru 2kΩ Full-Bridge Strain Gages (model dependent)
● High Level Voltage Outputs
● 1500Vrms Transformer Isolation
● ANSI/IEEE C37.90.1 Transient Protection
● Input Protected up to 240VAC Continuous
● 100dB CMR
● 3Hz or 8kHz Signal Bandwidth
● ±0.05% Accuracy
● ±0.02% Linearity
● Low Drift with Ambient Temperature
● UL, CSA, FM and CE Certifications Pending
● Mix and Match Modules
Signal Conditioning Module DI-8B38-05DI-8B38 Strain Gage Input Module (Wide (8kHz) and Narrow (3Hz) Bandwidth)
● Provides gain and excitation for strain gage-based transducers (load cells, pressure sensors, torque meters, etc.)
● Interfaces to 100Ω Thru 2kΩ Full-Bridge Strain Gages (model dependent)
● High Level Voltage Outputs
● 1500Vrms Transformer Isolation
● ANSI/IEEE C37.90.1 Transient Protection
● Input Protected up to 240VAC Continuous
● 100dB CMR
● 3Hz or 8kHz Signal Bandwidth
● ±0.05% Accuracy
● ±0.02% Linearity
● Low Drift with Ambient Temperature
● UL, CSA, FM and CE Certifications Pending
● Mix and Match Modules
Signal Conditioning Module DI-8B38-31DI-8B38 Strain Gage Input Module (Wide (8kHz) and Narrow (3Hz) Bandwidth)
● Provides gain and excitation for strain gage-based transducers (load cells, pressure sensors, torque meters, etc.)
● Interfaces to 100Ω Thru 2kΩ Full-Bridge Strain Gages (model dependent)
● High Level Voltage Outputs
● 1500Vrms Transformer Isolation
● ANSI/IEEE C37.90.1 Transient Protection
● Input Protected up to 240VAC Continuous
● 100dB CMR
● 3Hz or 8kHz Signal Bandwidth
● ±0.05% Accuracy
● ±0.02% Linearity
● Low Drift with Ambient Temperature
● UL, CSA, FM and CE Certifications Pending
● Mix and Match Modules
Signal Conditioning Module DI-8B38-32DI-8B38 Strain Gage Input Module (Wide (8kHz) and Narrow (3Hz) Bandwidth)
● Provides gain and excitation for strain gage-based transducers (load cells, pressure sensors, torque meters, etc.)
● Interfaces to 100Ω Thru 2kΩ Full-Bridge Strain Gages (model dependent)
● High Level Voltage Outputs
● 1500Vrms Transformer Isolation
● ANSI/IEEE C37.90.1 Transient Protection
● Input Protected up to 240VAC Continuous
● 100dB CMR
● 3Hz or 8kHz Signal Bandwidth
● ±0.05% Accuracy
● ±0.02% Linearity
● Low Drift with Ambient Temperature
● UL, CSA, FM and CE Certifications Pending
● Mix and Match Modules
Signal Conditioning Module DI-8B38-35DI-8B38 Strain Gage Input Module (Wide (8kHz) and Narrow (3Hz) Bandwidth)
● Provides gain and excitation for strain gage-based transducers (load cells, pressure sensors, torque meters, etc.)
● Interfaces to 100Ω Thru 2kΩ Full-Bridge Strain Gages (model dependent)
● High Level Voltage Outputs
● 1500Vrms Transformer Isolation
● ANSI/IEEE C37.90.1 Transient Protection
● Input Protected up to 240VAC Continuous
● 100dB CMR
● 3Hz or 8kHz Signal Bandwidth
● ±0.05% Accuracy
● ±0.02% Linearity
● Low Drift with Ambient Temperature
● UL, CSA, FM and CE Certifications Pending
● Mix and Match Modules
Signal Conditioning Module DI-8B40DI-8B40 Analog Voltage Input Module 1kHz Bandwidth (±10 mV ~ ±100 mV Input Range)
● Accepts Millivolt Level Signals
● High Level Voltage Output
● 1500 Vrms Transformer Isolation
● ANSI/IEEE C37.90.1 Transient Protection
● Input Protected to 240 VAC Continuous
● 100 dB CMR
● 1 kHz Signal Bandwidth
● ±0.05% Accuracy
● ±0.02% Linearity
● Low Drift with Ambient Temperature
● CSA, FM and CE Certifications Pending
● Mix and Match Modules
Signal Conditioning Module DI-8B41DI-8B41 Analog Voltage Input Module 1 kHz Bandwidth (±1 V ~ ±60 V Input Range)
● Accepts Voltage Level Signals
● High Level Voltage Output
● 1500 Vrms Transformer Isolation
● ANSI/IEEE C37.90.1 Transient Protection
● Input Protected to 240 VAC Continuous
● 100 dB CMR
● 1 kHz Signal Bandwidth
● ±0.05% Accuracy
● ±0.02% Linearity
● Low Drift with Ambient Temperature
● CSA, FM and CE Certifications Pending
● Mix and Match Modules
Signal Conditioning Module DI-8B42DI-8B42 2-Wire Transmitter Interface Module (4 mA ~ 20 mA Input Range)
● +12 VDC Loop Supply
● Provides Isolation for Non-Isolated 2-Wire Transmitters
● High Level Voltage Outputs
● 1500 Vrms Transformer Isolation
● ANSI/IEEE C37.90.1 Transient Protection
● Input Protected to 40 VAC Continuous
● 100 dB CMR
● 100 Hz Bandwidth
● ±0.05% Accuracy
● ±0.02% Linearity
● Low Drift with Ambient Temperature
● UL, CSA, FM and CE Certifications Pending
● Mix and Match Module Types
Signal Conditioning Module DI-8B45DI-8B45 Frequency Input Module (0 ~ 100 kHz Input Range)
● Accepts Frequency Input Signals 0 ~ 100 kHz
● TTL or Zero-Crossing Signal Inputs
● High Level Voltage Outputs
● 1500 Vrms Transformer Isolation
● ANSI/IEEE C37.90.1 Transient Protection
● Input Protected up to 240 VAC Continuous
● 100 dB CMR
● 70 dB NMR at 60 Hz
● ±0.05% Accuracy
● ±0.02% Linearity
● Low Drift with Ambient Temperature
● UL, CSA, FM and CE Certifications Pending
● Mix and Match Module Types on Backpanel
Signal Conditioning Module DI-8B47DI-8B47 Linearized Thermocouple Input Modules (Type J)
● Interfaces to Thermocouple Type J
● Linearizes Thermocouple Signal
● High Level Voltage Outputs
● 1500 Vrms Transformer Isolation
● ANSI/IEEE C37.90.1
● Input Protected to 240 VAC Continuous
● 120 dB CMR
● 70 dB NMR at 60 Hz
● Low Drift with Ambient Temperature
● Accurate CJC -40 °C ~ +85 °C
● CSA, FM, and CE Certifications Pending
● Mix and Match Modules
Signal Conditioning Module DI-8B47KDI-8B47 Linearized Thermocouple Input Modules (Type K)
● Interfaces to Thermocouple Type K
● Linearizes Thermocouple Signal
● High Level Voltage Outputs
● 1500Vrms Transformer Isolation
● ANSI/IEEE C37.90.1
● Input Protected to 240VAC Continuous
● 120dB CMR
● 70dB NMR at 60Hz
● Low Drift with Ambient Temperature
● Accurate CJC -40°C to +85°C
● CSA, FM, and CE Certifications Pending
● Mix and Match Modules
Signal Conditioning Module DI-8B47TDI-8B47 Linearized Thermocouple Input Modules (Type T)
● Interfaces to Thermocouple Type T
● Linearizes Thermocouple Signal
● High Level Voltage Outputs
● 1500Vrms Transformer Isolation
● ANSI/IEEE C37.90.1
● Input Protected to 240VAC Continuous
● 120dB CMR
● 70dB NMR at 60Hz
● Low Drift with Ambient Temperature
● Accurate CJC -40°C to +85°C
● CSA, FM, and CE Certifications Pending
● Mix and Match Modules
Signal Conditioning Module DI-8B50DI-8B50 Analog Voltage Input Module 20 kHz Bandwidth (±20 mV ~ ±100 mV Input Range)
● Accepts Millivolt and Voltage Level Signals
● High Level Voltage Output
● 1500 Vrms Transformer Isolation
● ANSI/IEEE C37.90.1 Transient Protection
● Input Protected to 240 VAC Continuous
● 100 dB CMR
● Up to 20 kHz Signal Bandwidth
● ±0.10% Accuracy
● ±0.05% Linearity
● Low Drift with Ambient Temperature
● CSA, FM and CE Certifications Pending
● Mix and Match Modules