Wij gebruiken cookies om uw ervaring beter te maken. Om te voldoen aan de cookie wetgeving, vragen we uw toestemming om de cookies te plaatsen. Meer informatie.
Signal Conditioning Module DI-8B38
DI-8B38 Strain Gage Input Module (Wide (8 kHz) and Narrow (3 Hz) Bandwidth)
● Provides gain and excitation for strain gage-based transducers (load cells, pressure sensors, torque meters, etc.)
● Interfaces to 100 Ω Thru 2 kΩ Full-Bridge Strain Gages (model dependent)
● High Level Voltage Outputs
● 1500 Vrms Transformer Isolation
● ANSI/IEEE C37.90.1 Transient Protection
● Input Protected up to 240 VAC Continuous
● 100 dB CMR
● 3 Hz or 8 kHz Signal Bandwidth
● ±0.05% Accuracy
● ±0.02% Linearity
● Low Drift with Ambient Temperature
● UL, CSA, FM and CE Certifications Pending
● Mix and Match Modules
DI-8B modules are an optimal solution for monitoring real-world process signals and providing high level signals to a data acquisition system. Each DI-8B38 module isolates, filters and amplifies a full-bridge strain gage input signal and provides an analog voltage output.
The 8B38 can interface to tranducers with a nominal resistance of 100Ω to 2kΩ depending upon the model. Bridge excitation is provided from the module with a stable 10.00V or 3.33V source. Full scale sensitivities of 2mV/V and 3mV/V are offered as standard.
Signal filtering is accomplished with a five-pole filter optimized for time and frequency response which provides 100dB per decade of normal-moderejection above the filter cutoff frequency. One pole of this filter is on the field side of the isolation barrier for anti-aliasing, and the other four are on the system side.
A special input circuit on the DI-8B38 module provides protection against accidental connection of power-line voltages up to 240VAC. Clamp circuits on the I/O and power terminals protect against harmful transients.
Isolation is provided by optical coupling to suppress transmission of common mode spikes or surges. The module is powered from +5VDC, ±5%.
The modules are designed for installation in Class I, Division 2 hazardous locations and have a high level of immunity to environmental noise.
±30mV (DI-8B38-x2)
±20mV (DI-8B38-x5)
3Hz (DI-8B38-3x)
300Ω to 2kΩ (DI-8B38-x2, DI-8B38-x5)
+10V ±5mV (DI-8B38-x2, DI-8B38-x5)
100Ω to 2kΩ (Di-8B38-x1)
300Ω to 2kΩ (DI-8B38-x2, DI-8B38-x5)
2mV/V (Di-8B38-x5)
Input Bias Current | ±0.5nA | ||||||
Input Resistance |
|
||||||
Input Protection |
|
||||||
Excitation Load Regulation | 15ppm/mA | ||||||
Excitation Stability | 50ppm/°C | ||||||
Excitation Protection | 120VAC | ||||||
CMV, Input to Output | 1500Vrms max | ||||||
Transient, Input to Output | ANSI/IEEE C37.90.1 | ||||||
CMR (50Hz or 60Hz) | 100dB | ||||||
NMR | 100dB per decade above 8kHz (DI-8B38-0x only) | ||||||
Accuracy² | ±0.05% Span | ||||||
Nonlinearity | ±0.02% Span | ||||||
Stability |
|
||||||
Noise (Output, 100kHz) |
|
||||||
Response Time, 90% Span |
|
||||||
Output Protection (Transient) | ANSI/IEEE C37.90.1 (Continuous Short to Ground) | ||||||
Power Supply Voltage | Power Supply Voltage | ||||||
Power Supply Current |
|
||||||
Power Supply Sensitivity | ±50ppm/% | ||||||
Dimensions | 28.1 x 41.9 x 10.2mm | ||||||
Operating Temperature | -40ºC to +85ºC | ||||||
Storage Temperature | -40ºC to +85ºC | ||||||
Humidity | 0 to 95% Noncondensing | ||||||
¹240VAC between + and -/+EXC/-EXC terminals. 120VAC between - and +EXC/-EXC terminals and between +EXC and -EXC terminals. | |||||||
²Includes nonlinearity, hysteresis, and repeatability. |