Signal Conditioning Module DI-8B47K
Levertijd:
3~4 weken
SKU
DI-8B47K
DI-8B47 Linearized Thermocouple Input Modules (Type K)
● Interfaces to Thermocouple Type K
● Linearizes Thermocouple Signal
● High Level Voltage Outputs
● 1500Vrms Transformer Isolation
● ANSI/IEEE C37.90.1
● Input Protected to 240VAC Continuous
● 120dB CMR
● 70dB NMR at 60Hz
● Low Drift with Ambient Temperature
● Accurate CJC -40°C to +85°C
● CSA, FM, and CE Certifications Pending
● Mix and Match Modules
DI-8B modules are an optimal solution for monitoring real-world process signals and providing high level signals to a data acquisition system. Each DI-8B47 module isolates, filters, amplifies, and linearizes a single channel of temperature input from a thermocouple and provides an analog voltage output.
Linearization is accomplished using a four breakpoint piecewise linear approximation.
The DI-8B47 can interface to industry standard thermocouple type J, K, and T and has an output signal of 0V to +5V. Each module is cold-junction compensated to correct for parasitic thermocouples formed by the thermocouple wire and screw terminals on the mounting backpanel. Upscale open thermocouple detect is provided by an internal pull-up resistor.
Signal filtering is accomplished with a three-pole filter optimized for time and frequency response which provides 70dB of normal-mode-rejection at 60Hz. One pole of this filter is on the field side of the isolation barrier for anti-aliasing, and the other two are on the system side.
A special input circuit on the DI-8B47 module provides protection against accidental connection of power-line voltages up to 240VAC.
The modules are designed for installation in Class I, Division 2 hazardous locations and have a high level of immunity to environmental noise.
U bent wellicht ook geïnteresseerd in de volgende producten: