2~7 dagen

μPAC-7186 CAN bus series Programmable Automation Controller

● 1000 VDC voltage protection on CAN side
● Compatible with CAN specification 2.0 parts A and B
● Programmable transfer rate up to 1 Mbps
● Jumper select 120Ω terminator resistor for CAN channel
● Supports a variety of TCP/IP features, including TCP, UDP, IP, ICMP, ARP
● 10/100BASE-T NE2000 compatible Ethernet Controller
● Upgradable OS image
● Remote Configuration
● 64-bit hardware unique serial number inside
● COM driver support interrupt & 1K QUEUE Input & Output buffer
● COM port: COM1, COM2
● Built-in self-tuner ASIC controller on RS-485 port
● 7-segment LED display
● Built-in ICP DAS’s MiniOS7
● Program download port: COM1 or Ethernet Port

“Embedded Internet” and “Embedded Ethernet” are hot topics today. Nowadays the Ethernet protocol becomes the de-facto standard for local area network. Via Internet, connectivity is occurring everywhere, from home appliances to vending machines to testing equipment to UPS…etc.

Using Ethernet for network in industrial area is appealing because the required cabling is already installed. The ICPDAS μPAC-7186EXD-CAN are powered by 80188-80 processor with 512K bytes of static RAM, and 512K bytes of Flash memory.

All of them provide several communication interfaces to adapt to various applications, such as CAN port, RS-232 port, RS-485 port and Ethernet interface. Uses can program their application program flexibly with C/C++ language because of the built-in MiniOS7 operation system. Besides, the μPAC-7186EXD-CAN series PACs have different I/O types for users to match their requirement. For ICPDAS μPAC-7186EXD-CAN there is no I/O channel.

It is useful for transfer the command from differential communication interface. Therefore, the μPAC-7186EXD-CAN series PACs are economic and convenient solution for diversification CAN application.





● Process monitor and control
● IO monitor
● High speed data acquisition system
● Communication switching
● Factory automation
● Laboratory automation

Meer informatie
CPU 80186, 80 MHz or compatible
Flash 512 KB
NVRAM 31 bytes (battery backup, data valid for up to 10 years)
RTC (Real Time Clock) Yes
ESD Protection 4 kV class A
CAN Interface
Controller NXP SJA1000T with 16 MHz clock
Transceiver NXP 82C250
Channel Number 1
Connector 5-pin screwed terminal block (CAN_L, CAN_H, N/A for others)
Baud Rate (bps) 10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 M (allow user-defined baud rate)
Isolation 1000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminator Resistor Jumper for 120 Ω terminator resistor
Specification ISO-11898-2, CAN 2.0A and CAN 2.0B
UART Interface
COM1 RS-232
COM1 Connector 5-pin screwed terminal block (TxD, RxD, RTS, CTS, GND)
COM2 RS-485 (Self-turner inside)
COM2 Connector 2-pin screwed terminal block (DATA+, DATA-)
Baud Rate (bps) 110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
Ethernet Interface
Controller 10/100Base-TX Ethernet Controller (Auto-negotiating, Auto_MDIX)
Power Supply Unregulated +10 ~ +30 VDC
Protection Power reverse polarity protection, Overvoltage brownout protection
Power Consumption 3.0 W
Dimensions (w x l x h) 72 x 33 x 122mm
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -40 °C ~ +80 °C
Humidity 5 ~ 95% RH, non-condensing
Mijn vraag gaat over: ICPDAS μPAC-7186EXD-CAN
U bent wellicht ook geïnteresseerd in de volgende producten:
To Top