ICPDAS I-7520 - RS-232 to RS-485 converter

Levertijd:

Uit voorraad leverbaar

SKU

I-7520

Isolated RS-232 to RS-485 Converter

● Auto Switching Baud Rate, 300~115200 bps
● 3000 VDC Isolation Protection on the RS-485 side
● Transmission Speed of up to 115200 bps
● ESD Protection for the RS-232/485 Data Line
● Power Input of +10 ~ +30 VDC
● Supports Operating Temperatures from -25 °C ~ +75 °C
● DIN-Rail Mountable

Brochure EN

Details

Most industrial computer systems provide standard RS-232 serial ports. Though widely accepted, RS-232 has limited transmission speed, range, and networking capabilities. The RS-485 standards overcome these limitations by using differential voltage lines for data and control signals, which transparently converts RS-232 signals into isolated RS-485 signal with no need to change any hardware or software.

The I-7520 lets you easily build an industrial grade, long-distance communication system using standard PC hardware.

The design of the isolation between the I-7520 and the I-7520R/AR is different. If the user wants to supply power from the PLC/PC, the I-7520R/AR should be used, otherwise the isolation will be broken. Refer to the I-7000 bus converter manual for detailed information.

SPECIFICATIES

Meer informatie

Art.nr.

I-7520

Fabrikant

ICPDAS

Land van herkomst

Taiwan

Interface

Serial Interface RS-232	TxD, RxD, GND
Serial Interface RS-422	-
Serial Interface RS-485	Data+, Data-
2-wire Cabling/4-wire Cabling	Belden 8941 (2P twisted-pair cable)/Belden 8942 (4P twisted-pair cable), if different cables are used, the transmission distance may change
Transfer Distance	Max. 1,200 m for at speed 9.6 kbps; Max. 400 m at 115.2 kbps
Max. Devices Supported	256 (Without repeater)
Self-Tuner Asic Inside	Yes
Speed	300 ~ 115200 bps
ESD Protection	Yes
3000 VDC Isolated Voltage	On RS-232 side
Connection RS-232	9-Pin Female D-Sub
Connection RS-422/485	Removable 10-Pin Terminal Block