EtherWAN

 EX78931-0VB   12-Port 10/100/1000BASE-TX with 8-port PoE + 4-port Gigabit SFP Hardened Managed Ethernet Switch

● Ultra High-Power PoE Switch 60W PoE
● Intelligent Management
● Remote Secure Access

Hardened Managed 6-port 10/100BASE (4 x PoE + 2 x 60W PoE) and 2-port Gigabit Ethernet Switch

● Ultra High-Power PoE Switch 60W PoE
● Intelligent Management
● Remote Secure Access

Hardened Surge Protection Device – RJ45

● Protection Solution Against Voltage Surge
● Flexible Installation
● Wide Temperature Range
● Compatible with 10/100BASE-T, Gigabit and PoE products

 Hardened 10/100BASE-TX Ethernet Extender

● UL60950 Certification
● High Speed Performance
● Wide Operating Temperature

10/100BASE-TX IEEE802.3af PoE Ethernet Extender over Coaxial Cable

● Power over Link™ up to 180 m (590 ft.)
● Ethernet extension solution with high transmission data rate up to 100Mbps
● Powered by IEEE802.3at Devices

 Hardened 10/100BASE-TX Ethernet Extender

● Certified by UL60950-1 standard
● Up to 100Mbps at 300 meters distance
● Up to 1Mbps at 2600 meters distance
● -40°C to 75°C wide operating temperature
● Redundant power inputs with Terminal Block 
● DIP switch to select Local or Remote side 
● Hardened aluminium case 
● DIN-rail mounting kit included 

Hardened 10/100BASE-TX PoL™/PoE Ethernet Extender over Coaxial Cable

● Power over Link™ up to 1.8 km
● Ethernet extension solution with high transmission data rate up to 100Mbps
● Transmission rate and PSE output power indicator LEDs
 

Managed 10/100/1000BASE-TX to 100/1000BASE-X Dual Rate Media Converter

● Complies with IEEE802.3 10BASE-T, 802.3u 100BASE-TX, 802.3ab 1000BASE-T, 802.3z 1000BASE-X
● Complies with IEEE 802.3ah OAM standard
● Supports SNMP V1, V2 Management
● Supports IN-BAND Loop Back and Diagnostic
● Gigabit transmission supports 9K bytes jumbo frame
● One fiber interface supports dual rate 100BASE-FX and 1000BASE-SX/LX fiber transmission
● Supports IEEE802.3x Flow controls: Flow control for full duplex and Back pressure for half duplex
● Auto-Negotiation, Auto-MDI/MDIX
● Full wire-speed forwarding rate
● Supports Wall Mounting installation or use with EMC1600 media converter chassis system

 

Hardened PoL/PoE Ethernet Extender over Copper Wires (including one ED3538T and one ED3538R)

● Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment
● Ethernet Port: 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
● 100Mbps communications link over existing copper telephone wire
● Operates transparent to higher layer protocols
● Six speeds with speed indicator LEDs on front panel of unit,
● Up to 100Mbps @ about 300meters (984 ft.); 1Mbps @ about 2,200meters (7,2186 ft.)
● ED3538R supports IEEE802.3at PSE standard for PoE/PD applications
● Supports Power Over Link application up to 1,200 meters (3,937 ft.) for Max. 5 watts power consumed PoE powered devices
● Auto data rate negotiation for Ethernet extension interface
● Redundant power inputs with Terminal Block and DC Jack
● -40XC to 75XC (-40XF to 167XF) operating temperature range and tested at -40XC to 85XC (-40XF to 185XF)
● Hardened aluminum case
● Supports DIN-Rail, Panel and Rack mount installation

 

Industrial 10/100BASE-TX Ethernet Extender over Coaxial Cable

● Operates transparent to higher layer protocols
● Ethernet Port: 10/100Mbps-Full-duplex, Auto-Negotiation, Auto-MDI/MDIX
● Ethernet Extender Port: Symmetrical on the VDSL, High-speed full-duplex up to 85Mbps communications link over existing coaxial cable
● Supports DIP switch to select Local or Remote side
● Ten reference speeds supports:
- Up to 85 Mbps @ about 200 meters
- Down to 1 Mbps @ about 2,600 meters
● -10°C to 60°C (14°F to 140°F) operating temperature range
● Hardened aluminum case
● Supports Din-Rail, Wall Mounting installation
● Supports EMC1600 chassis system installation for easy management and power redundancy accomplishment