ICPDAS M-7065B

Levertijd:
2~7 dagen
SKU
M-7065B

4-channel Isolated Digital Input and 5-channel DC SSR Output Module with 16-bit Counters

● Input: 4 single-ended
   ON: Voltage Level: 4 V ~ 30 V
   OFF Voltage Level: 0 ~ 1 V
● Output: 5 Form A power relay
● Contact rating:
Max. Load current 1.0 Arms
Min. Load current 10 mArms


The M-7000 series is a family of network data acquisition and control modules that support Modbus RTU and DCON protocols. With the Modbus RTU protocol, it can easily communicate with most popular SCADA/HMI software and PLC. It has the same form factor as the I-7000 series.

 

ICPDAS Power Relay Module M-7065 is a data acquisition and control module, digital input/output. The module can be remotely controlled using a set of commands, which we call the DCON protocol. Communication between the module and the host is in ASCII format via an RS-485 bi-directional serial bus standard. Baud Rates are software programmable and transmission speeds of up to 115.2K baud can be selected. The functionality of the M-7000 series is the same as the I-7000 series, except M-7000 series offers extended support for the Modbus RTU protocol.

Meer informatie
Art.nr.
M-7065B
Fabrikant
ICPDAS
Digital Input
Channels 4
Input Type Sink, Source, isolated channels with common ground or power
On Voltage Level +4 ~ +30 V
Off Voltage Level +1 V max.
Input Impedance 3 kΩ, 0.5 W
Counters
Channels: 4
Max. Counts: 16-bit (65535)
Max. Input Frequency: 100 Hz
Min. Pulse Width : 5 ms
Relay Output
Channels 2
Relay Type Form "A” relay SPST (N.O.)
Contact Rating DC: 3 ~ 30 VDC @1.0 Arms
Max. Load current 1.0 Arms
Min. Load current 10 mArms
Operating Time (Max.) 1 ms
Release Time (Min.) 1 ms
Surge Strength 4,000 VAC
Insulation Resistance 1000 MΩ min. at 500 VDC
Life Time long life, maintence free
Interface
Interface RS-485
Format N, 8, 1
Baud Rate 1200 ~ 115200 bps
LED Indicators
1 LED Power/Communication indicator
4 LED Digital Input indicators and 5 LEDs as Relay Output indicators (for M-7065BD)
Protocol
Support Modbus and DCON Protocol Yes
Power
Input Voltage Range 10 ~ 30 VDC
Power Consumption 0.6 W (max.)(M-7065B)/1.4 W (max.)(M-7065BD)
Omgeving
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -40 °C ~ +85 °C
Humidity 5 ~ 95%, non-condensing
ICPDAS M-7065B aanpassen

* Verplichte velden

Uw configuratie
M-7065B
ICPDAS M-7065B
Overzicht
    Mijn vraag gaat over: ICPDAS M-7065B
    U bent wellicht ook geïnteresseerd in de volgende producten:
    To Top