ICPDAS CAN-2053D

Levertijd:
2~7 dagen
SKU
CAN-2053D

DeviceNet Module of 16-channel Isolated Sink/Source Digital Input

● DeviceNet general I/O slave devices
● Group 2 Only Server (non UCMM-capable)
● Support Predefined Master/Slave Connection Set
● Connection supported (1 connection for Explicit Messaging, 1 connection for Polled I/O, 1 connection for Bit-Strobe I/O connection)
● Provide EDS file for DeviceNet master interface
● Support Application: PNP, NPN, TTL, and Relay Contact
● ESD Protection 4 kV Contact for each channel

 

DeviceNet is one kind of the network protocols based on the CAN bus and mainly used for the embedded network of the machine control, such as industrial machine control , aircraft engines monitoring, factory automation, medical equipments control, remote data acquisition, environmental monitoring, and packaging machines control, etc.

The CAN-2053D follows DeviceNet specification Volume I/II, Release 2.0. User can access the digital output status and set the configuration via DeviceNet EDS file. CAN-2053D has 16-channel isolated sink/source input and it can be used to various applications, such as PNP, NPN, TTL, relay contact and so forth. By owing to the DeviceNet masters of ICP DAS, you can quickly build a DeviceNet network to approach your requirements. For more information about the DeviceNet master interfaces and other DeviceNet products, please refer to the following web site.

 

APPLICATIONS:

Alarm detector
Switch detection

https://fieldworks.nl/media/imageproducts/icpdas/CAN-2053D_Application.jpg

Meer informatie
Art.nr.
CAN-2053D
Fabrikant
ICPDAS
DeviceNet Interface
DeviceNet Specification Volume I, Release 2.0 & Volume II, Release 2.0, Errata5
DeviceNet subscribe Group 2 Only Server
Connection supported
1 connection for Explicit Messaging
1 connection for Polled I/O
1 connection for Bit-Strobe I/O
Baud Rate
125 kbps, 250 kbps, 500 kbps
Node ID 0 ~ 63
Heartbeat Message Yes
Shutdown Message Yes
Terminator Resistor Switch for 120 Ω terminator resistor
Connector
5-pin screwed terminal block
(CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+)
EDS file Yes
LED PWR/NET/MOD
Digital Input
Channels 16 (Sink/Source)
ON Voltage Level +3.5 ~ +30 VDC
OFF Voltage Level +1 VDC Max.
Input Impedance 3 kΩ, 0.3 W
Intra-module Isolation 3750 Vrms
ESD Protection 4 kV contact for each channel
LED Indicators
DeviceNet Status 3 LEDs for PWR/NET/MOD
Terminal Resister 1 LED as terminal resister indicators
DI LED 16 LEDs as digital input indicators
Power
Power Supply Unregulated +10 ~ +30 VDC
Power Consumption 1.5 W
Mechanical
Installation DIN-Rail Mounting
Dimensions (w x l x h) 32.3 x 99 x 77.5mm
Omgeving
Operating Temperature -25 °C ~ 75 °C
Storage Temperature -30 °C ~ 80 °C
Humidity 10 ~ 90% RH, non-condensing
Mijn vraag gaat over: ICPDAS CAN-2053D
U bent wellicht ook geïnteresseerd in de volgende producten:
To Top