ICPDAS M-7084

Levertijd:
2~7 dagen
SKU
M-7084

4-/8-channel Counter/Frequency/Encoder Input Module

● 8 Up Counter/Frequency Channels or 4 Encoder Input Channels
● Programmable Digital Filter
● 32-bit Counter
● Individual Channel Configuration
● Virtual Battery Backup to Preserve Counter Values
● +/-4 kV ESD Protection
● Preset Values for Counter Input
● RoHS Compliant
● Wide Operating Temperature Range: -25 ~ +75°C

 

The M-7084 is a 32-bit high-speed Counter/Frequency/Encoder input module that offers a variety of mode options, including "Up Counter”, "Frequency Input", "Up/Down Counter", "Pulse Direction Counter" and "A/B Phase Counter" modes. The mode combinations can be individually set for all 8 channels, where some channels can be set to “Up Counter” mode and other channels can be simultaneously set to “Frequency”, "Up/Down Counter" or “Encoder input” mode. The built-in digital filter can be used to filter out noise where the high/low pulse width is smaller than the minimum high/low width of the digital filter. The M-7084 provides a virtual battery backup function in counter mode to ensure counter value preservation.
Meer informatie
Art.nr.
M-7084
Fabrikant
ICPDAS
Counter Input
Channels 2 independent 32-bit counters, counter 0&1
Input Type Isolated or non-isolated
Input Level for Isolation and Non-isolation
Logic level 0: +1 V max.
Logic level 1: +3.5 ~ 30 V
Isolation Voltage 3750 Vrms
Non-Isolated Input Level
(Programmable)
Logic level 0: 0 ~ +5 V (default= 0.8 V)
Logic level 1: 0 ~ +5 V (default= 2.4 V)
Maximum Count
32-bit (4,294,967,295)
Programmable Digital Noise Filter 2 us ~ 65 ms
Alarming Alarm on counter 0 or counter 0 & 1, Programmable
Counter Preset Value Programmable
Frequency Measurement
Input Frequency 1 Hz ~ 100 KHz max.
Gate Time 1.0 or 0.1 sec, programmable
Digital Output
Channels 4-channel Up/Down Counter (CW/CCW)
4-channel Dir/Pulse Counter (Bi-direction)
4-channel A/B Phase (Quadrant Counting)
8-channel Up Counter
8-channel Frequency
Types Counter, Frequency or Encoder
On Voltage Level
+3.5 VDC ~ +30 VDC
Off Voltage Level
+1 VDC Max.
Interface
Interface RS-485
Format N, 8, 1
Baud Rate 1200 ~ 115200 bps
LED Indicators

 

Power 1 LED, Red
Protocol
Support Modbus and DCON Protocol Yes
Power
Input Voltage Range 10 ~ 30 VDC
Power Consumption 1.32 W (max.)
Omgeving
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -30 °C ~ +85 °C
Humidity 10 ~ 90%, non-condensing
Mijn vraag gaat over: ICPDAS M-7084
U bent wellicht ook geïnteresseerd in de volgende producten:
To Top