ICPDAS CAN-2054D

Levertijd:

2~7 dagen

SKU

CAN-2054D

8-channel isolated sink/source digital input and 8-channel isolated open-collector digital output module

● DeviceNet general I/O slave devices
● Comply with DeviceNet specification Volume I, Release 2.0 & Volume II, Release 2.0, Errata 5
● Group 2 Only Server (non UCMM-capable)
● Support Predefined Master/Slave Connection Set
● Connection supported (1 connection for Explicit Messaging, 1 connection for Polled I/O, 1 connection for Bit-Strobe I/O connection)
● Support DeviceNet heartbeat and shutdown messages
● Provide EDS file for DeviceNet master interface

Brochure EN

Details

DeviceNet is one kind of the network protocols based on the CAN bus and mainly used for the embedded network of the machine control, such as industrial machine control , aircraft engines monitoring, factory automation, medical equipments control, remote data acquisition, environmental monitoring, and packaging machines control, etc.

The CAN-2054D follows DeviceNet specification Volume I/II, Release 2.0. User can access the digital I/O status and set the configuration via DeviceNet EDS file. This module has 8-channel isolated sink/source input and 8-channel isolated sink output. It can be applied to various applications, such as PNP, NPN, TTL, relay contact and so forth. By owing to the DeviceNet masters of ICP DAS, you can quickly build a DeviceNet network to approach your requirements.

APPLICATIONS:

SPECIFICATIES

Meer informatie

Art.nr.

CAN-2054D

Fabrikant

ICPDAS

DeviceNet Interface

DeviceNet Specification

Volume I, Release 2.0 & Volume II, Release 2.0, Errata5

DeviceNet Subscribe

Group 2 Only Server

Connection Supported

1 connection for Explicit Messaging

1 connection for Polled I/O

1 connection for Bit-Strobe I/O

Baud Rate

125 kbps, 250 kbps, 500 kbps

Node ID

0 ~ 63

Heartbeat Message

Yes

Shutdown Message

Yes

Terminator Resistor

Switch for 120 Ω terminator resistor

Connector

5-pin screwed terminal block

(CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+)

EDS File

Yes

LED

PWR/NET/MOD

Digital Input

Channels	8 (Sink/Source)
On Voltage Level	+3.5 ~ +30 VDC
Off Voltage Level	+1 VDC Max.
Input Impedance	3 kΩ, 0.3 W
Intra-module Isolation	3750 Vrms
ESD Protection	4 kV Contact for each channel

Digital Output

Channels	8 (Sink)
Load Voltage	+5 ~ +30 VDC
Output Max Load Current	700 mA per channel
Output Type	Open Collector
Intra-module Isolation	3750 Vrms
ESD Protection	4 kV Contact for each channel

LED Indicators

DeviceNet Status	3 LEDs for PWR/NET/MOD
Terminal Resister	1 LED to terminal resister indicators
DI LED	8 LEDs to digital input indicators
DO LED	8 LEDs to digital output indicators