ICPDAS FR-2017iT
8/16-channel Isolated Analog Input Module With High Voltage Protection And Isolated Communication Line
● Built-in wire-saving FRnet control
● High-speed transmission reliability
● Simple synchronization mechanism
● No software overhead on protocol processing
● Supporting broadcasting (1:n data transmission)
● Duplicating output easily
● Fixed I/O scan-time and I/O synchronization
● DIN-Rail mountable
The FR-2017iT is a 12-bit, 8-channel differential or 16-channel single-ended analog inputs module that provides two ways to select input range (±150mV, ±500mV, ±1V, ±5V, ±10V, ±20mA, 0~20mA and 4~20mA). One way provides switch selectable the same range at all channels and another each analog channel is allowed to configure an individual range by software selectable. It also has 240Vrms high overvoltage protection for all analog inputs.
The FR-2000 I/O module has an FRnet interface. The users can daisy chain several FR-2000 modules together. Via FRnet, the FR-2000 modules can extend the remote I/O control of PC, PAC and PLC easily. Further information about the networking of FR-2017iT/2024iT; refer to literatures related to I-7188EF, I-8172W, and FRB-100/200/200U.
Input Channels | 8 differential or 16 single-ended, switch selectable | ||
Input Type |
|
||
Resolution |
|
||
Sampling Rate |
|
||
Accuracy | +/-0.1% (1 channel) / +/-0.5% (8/16 channels) or better | ||
Bandwidth | 15.7Hz (1 channel) / 78.7Hz (8/16 channels) | ||
Zero Drift | +/-20uV/°C | ||
Span Drift | +/-25ppm/°C | ||
Input Impedance | Voltage: 2 MΩ (Differential), 1 MΩ (Single-ended) | ||
Common Mode Rejection | 86 dB min. | ||
Normal Mode Rejection | 100 dB | ||
Individual Channel Configuration | Yes (by software, requires optional CA-0904 cable) | ||
Overvoltage Protection | Differential: 240 Vrms, Single-ended: 150 Vrms | ||
Connection | 20-pin Removable Terminal Block |
Isolation Voltage | 3000 Vrms | ||
2-wire Cabling |
|
||
Transfer Distance |
|
||
LED Indicators | Power, Communication Run, Communication Error, Terminal resistor, Digital output | ||
Transfer Speed |
|
||
Cyclic Scan Time |
|
ESD (IEC 61000-4-2) |
|
||
EFT (IEC 61000-4-4) | 4 kV for power liner | ||
Surge (IEC 61000-4-5) | 3 kV for power liner |
Input Voltage Range | +10 ~ +30 VDC (Non-isolation) |
Power Consumption | 2.4 W Max |
Connector | 5-Pin Removable Terminal Block |
Case | Plastic |
Flammability | UL 94V-0 materials |
Dimensions (w x h x d) | 32.5 x 110 x 102mm |
Installation | DIN-Rail |
Operating Temperature | -25 °C ~ +75 °C |
Storage Temperature | -30 °C ~ +85 °C |
Humidity | 10 ~ 90% non-condensing |