ICPDAS M-7011D
1-channel Thermocouple Input Module with LED Display
● 3000 VDC Isolated analog input.
● 24-bits sigma-delta ADC to provide excellent accuracy.
● Thermocouple direct connect with built-in CJC
● Software calibration
● Dual Watchdog
The M-7000 series is a family of network data acquisition and control modules that support Modbus RTU and DCON protocols. With the Modbus RTU protocol, it can easily communicate with most popular SCADA/HMI software and PLC. It has the same form factor as the I-7000 series.
The ICPDAS Analog Input Module M-7011D provides cost-effective protection and conditioning for a wide range of valuable industrial control signals and systems. We provide FREE DCON utility which can help users to configure and test M-7011D modules.
Plenty of library functions and demo programs are provided to let users develop programs easily under Windows, Linux and DOS operating systems. Users may mount the modules on a DIN-Rail, panel or wall. Modules have a screw-terminal block to connect to the signals.
Input Channels | 1 | |||
Input Type |
|
|||
Resolution | Resolution | |||
Sampling Rate | 10 samples/sec | |||
Accuracy | ±0.5 uV/°C | |||
Zero Drift | ±0.5 uV/°C | |||
Span Drift | 25 ppm/°C | |||
Bandwidth | 5.24 Hz | |||
Common Mode Rejection | 150 dB | |||
Normal Mode Rejection | 100 dB | |||
Input Impedance | 20 MΩ | |||
Intra-module Isolation, Field to Logic | 3000 VDC |
Channels | 1 |
Logic Level 0 | +1 V max |
Logic Level 1 | +3.5 V ~ 30 V |
Max. Input Frequency | 50 Hz |
Min. Pulse Width | 1 ms |
Channels | 2 |
Output Type | Sink, Open Collector to 30 V |
Output Load | 30 mA max. per channel |
Power Dissipation | 300 mW |
Interface | RS-485 |
Format | N, 8, 1 |
Baudrate | 1200 ~ 115200 bps |
1 LED | Power/Communication |
Digits | 4½ digits |
Support Modbus and DCON Protocol | Yes |
Input | +10 ~ +30 VDC |
Power Consumption | 1.5 W |
Operating Temperature | -25 °C ~ +75 °C |
Storage Temperature | -30 °C ~ +75 °C |
Humidity | 5 ~ 95%, non-condensing |