ICPDAS M-7016
2-channel Strain Gauge Input Module
● Resolution: 16-bit
● Channels: 2
● Input type: mV, V and mA
● Input range: ±15 mV, ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V, ±20 mA
● Isolation: 3000 V
● Sampling rate: 10 Hz
The M-7000 series is a family of network data acquisition and control modules that support Modbus RTU and DCON protocols. With the Modbus & RTU protocol, it can easily communicate with most popular SCADA/HMI software and PLC. It has the same form factor as the I-7000 series.
The ICPDAS Analog Input Module M-7016 is the latest strain gauge input modules from ICP DAS. Around our surroundings, there are numerous examples of converting force into a measurable electrical output. In most cases, we need a strain gauge type load cell. How are we going to do to make the most use of the electrical output?
The ICPDAS Analog Input Module M-7016 is definitely your #1 choice! The M-7016 series not only process the data from load cells or strain gauges, but also do linear mapping at the same time for intuitive results; by user-defined corespondent table, the M-7016 series convert the data into weight directly!
In the new models, the M-7016 series support both Modbus RTU & DCON protocols.
| Input Channels | 2 | ||
| Input Type | ±15 mV, ±50 mV, ±100 mV,± 500 mV , ±1 V,± 2.5 V, ± 20 mA | ||
| Resolution | 16-bit | ||
| Sampling Rate |
|
||
| Accuracy | ±0.05% FSR | ||
| Bandwidth | 5.24 Hz | ||
| Zero Drift | ±0.5 uV/ °C | ||
| Span Drift | 25 ppm/°C | ||
| Common Mode Rejection | 150 dB | ||
| Normal Mode Rejection | 100 dB | ||
| Overvoltage Protection | 10 V (P-P) | ||
| Input Impedance | 20 MΩ | ||
| Intra-module Isolation, Field to Logic | 3000 VDC |
| Output Channels | 1 |
| Output Range | 0 ~ +10V |
| Max. Output Load | 40 mA |
| Accuracy | ±0.05% of FSR |
| Drift | ±50 ppm/ °C |
| Output Impedance | 12 Ω |
| Isolation | 3000 VDC |
| Channels | 1 |
| Logic Level 0 | + 1 V max |
| Logic Level 1 | + 3.5 V ~ 30 V |
| Max. Input Frequency | 50 Hz |
| Min. Pulse Width | 1 mS |
| Channels | 4 |
| Output Type | Sink, Open collector to 30 V |
| Output Load | 30 mA max per channel |
| Power Dissipation | 300 mW |
| Interface | RS-485 |
| Format | N, 8, 1 |
| Baud Rate | 1200 ~ 115200 bps |
| 1 LED | Power/Communication indicator |
| Support Modbus and DCON Protocol | Yes |
| Input Voltage Range | +10 ~ +30 VDC |
| Power Consumption | 2.4 W |
| Operating Temperature | -25 °C ~ +75 °C |
| Storage Temperature | -40 °C ~ +85 °C |
| Humidity | 5 ~ 95%, non-condensing |
