ICPDAS - 3-channel RTD Input Module using the DCON and Modbus Protocols with 7-segment LED Display - M-7033D

Levertijd:
2~7 dagen
SKU
M-7033D

3-channel RTD Input Module using the DCON and Modbus Protocols with 7-segment LED Display

● Sampling rate: 15 Hz (Total)
● Analog input type: Pt, Ni, RTD
● Input Channel: 3 differential
● Input Connection: 2, 3 or 4 wire
● Pt 100 input range: ± 100 °C, 0 ~ 100 °C, 0 ~200 °C, 0 ~ 600°C
● Ni 120 input range: -80 °C ~ 100 °C, 0 °C ~ +100 °C

The M-7000 series is a family of network data acquisition and control modules that support Modbus RTU and DCON protocols. With the Modbus RTU protocol, it can easily communicate with most popular SCADA/HMI software and PLC. It has the same form factor as the I-7000 series.

Meer informatie
Art.nr.
M-7033D
Fabrikant
ICPDAS
Analog Input
Input Channels 3
Input Type RTD
Wire Connection 2/3/4 wire
RTD Type Pt100 α=0.00385, Pt100 α=0.003916, Ni120, Pt1000 α=0.00385
Resolution 16-bit
Sampling Rate 15/12.5 samples/sec. while filter at 60/50 Hz
Accuracy ±0.1%
Bandwidth 15.7 Hz
Zero Drift ±0.5 uV/°C
Span Drift ±25 uV/°C
Common Mode Rejection 150 dB min
Normal Mode Rejection 100 dB min
Open Wire Detection Yes
Intra-module Isolation, Field to Logic 3000 VDC
Interface
Interface RS-485
Format N, 8, 1
Baud Rate 1200 ~ 115200 bps
LED Indicators
LED
Power/Communication
4 ½ digits
Protocol
Support Modbus and DCON Protocol Yes
Power
Input Voltage Range +10 ~ +30 VDC
Power Consumption 1.6 W
Omgeving
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -40 °C ~ +85 °C
Humidity 5 ~ 95%, non-condensing
Mijn vraag gaat over: ICPDAS - 3-channel RTD Input Module using the DCON and Modbus Protocols with 7-segment LED Display - M-7033D
U bent wellicht ook geïnteresseerd in de volgende producten:
To Top