Windows CE .NET 5.0 Inside

Desc
per pagina

4 producten

  1. Model: VP-4137

    ISaGRAF based ViewPAC with 10.4" Touch LCD and 3 I/O slots

    ● PXA270, 520 MHz CPU
    ● Windows CE 5.0
    ● ISaGRAF Ver.3 SoftLogic Inside (IEC 61131-3)
    ● Hard Real-Time Capability
    ● 3 I/O Slots
    ● IP65 Compliant Front Panel
    ● 3.5”/5.7”/10.4” TFT LCD
    ● Modbus RTU/TCP (Master, Slave)
    ● Support Soft-GRAF HMI
    ● Audio with Microphone-In and Earphone-Out
    ● Operating Temperature: -20 ~ +70 °C

     



  2. InduSoft and ISaGRAF Based ViewPAC

    InduSoft and ISaGRAF Based ViewPAC

    ● PXA 270 CPU (32-bit & 520MHz)
    ● Rubber Keypad with 24/6 Keys
    ● 64-bit Hardware Serial Number for Software Protection
    ● Rich I/O Expansion Ability (Ethernet, RS-232/422/485, FRnet, CAN bus)
    ● Built-in one Ethernet Port, 2 Serial Ports (RS-232 & RS-485)
    ● IP44 Compliant Front Panel
    ● Audio with MIC-In and Line-Out
    ● 3 Slots for High Profile I/O Modules
    ● Dual Battery Backup SRAM (512 KB)
    ● Operating Temperature: -20 °C ~ +70 °C

  3. ISaGRAF based ViewPAC with 3.5 LCD

    ISaGRAF based ViewPAC with 3.5 LCD

    ● eLogger HMI Application
    ● Modbus TCP/IP Master
    ● ZigBee Wireless Solution
    ● GPS Applications: ISaGRAF PAC plus I-87211W or GPS-721
    ● Stress Monitoring Application of Constructions
    ● Integrate with CAN/CANopen Devices and Sensors
    ● Send Email with One Attached File
    ● Data Acquisition and Auto-Report System
    ● Modbus RTU/TCP Slave Ports
    ● Modbus RTU/ASCII Master Ports
    ● Remote I/O Modules
    ● FRnet I/O
    ● New Hot-Swap and Redundant System
    ● Web HMI
    ● SMS: Short Message Service
    ● Motion Control
    ● Data Log
    ● Communicate with Other TCP/IP Server Devices or UDP Devices

  4. ISaGRAF based ViewPAC with 5.7" LCD

    ISaGRAF based ViewPAC with LCD

    ● eLogger HMI Application
    ● Modbus TCP/IP Master
    ● ZigBee Wireless Solution
    ● GPS Applications: ISaGRAF PAC plus I-87211W or GPS-721
    ● Stress Monitoring Application of Constructions
    ● Integrate with CAN/CANopen Devices and Sensors
    ● Send Email with One Attached File
    ● Data Acquisition and Auto-Report System
    ● Modbus RTU/TCP Slave Ports
    ● Modbus RTU/ASCII Master Ports
    ● Remote I/O Modules
    ● FRnet I/O
    ● New Hot-Swap and Redundant System
    ● Web HMI
    ● SMS: Short Message Service
    ● Motion Control
    ● Data Log
    ● Communicate with Other TCP/IP Server Devices or UDP Devices

Desc
per pagina

4 producten

To Top