ICPDAS PROFI-8855

Levertijd:
2~7 dagen
SKU
PROFI-8855

PROFIBUS Remote I/O Unit with 8 Expansion Slots

● Protocol& hierarchy: DP-V0 Slave
● Detect transmission rate (9.6 ~ 12000 kbps) automatically
● Support all I-8k & I-87k I/O Module
● Support Device-Related & Channel-Related Diagnosis
● Address 0~126 set by rotary switches or SSA-Telegram
● Support Hot-Swap for I-87k High-Profile Modules
● Network Isolation Protection
● 3000 VDC isolation protection on PROFIBUS side
● 4 kV ESD Protection (contacting for any terminal)



The PROFI-8855 Remote I/O Unit is specially designed for the slave device of PROFIBUS DP protocol. It supports up to 8 slots for ICPDAS I-8k series, I-87k Low Profile series, and I-87k High Profiles series I/O modules.

In addition, we also provide hot-swap function for I-87k High Profiles series I/O modules. To setup network, users can choose and configure I/O modules by using the GSD file without any other setting tools.

 

Meer informatie
Art.nr.
PROFI-8855
Fabrikant
ICPDAS
Hardware
CPU 80186, 80MHz or compatible
SRAM/Flash/EEPROM 512 KB / 512 KB / 2 KB
Watchdog
Watchdog IC
CPU built-in
Expansion Slot 8 slots
ESD Protection 4kV class A
PROFIBUS Interface
Controller Profichip VPC3+C
Transceiver ADI ADM2486
Connector 9-pin female D-Sub
Baud Rate 9.6k, 19.2k, 45.45k, 93.75k, 187.5k, 500k, 1.5M, 3M, 6M, 12M
Transmission Distance Depend on Baud Rate (for example, max. 1200m at 9.6kbps)
Isolation 3000V DC for DC-to-DC, 2500 vrms for bus-to-logic
Protocol DP-V0
UART Interface
COM RS-232 (For updating firmware)
LED Indicators
Round LED PWR LED, RUN LED, ERR LED
Power
Power Supply Unregulated +10 ~ +30 VDC
Protection Power reverse polarity protection, Overvoltage brownout protection
Power Consumption 5.5 W
Mechanical
Installation DIN-Rail or Wall Mounting
Dimensions (w x l x h) 312 mm x 91 mm x 132 mm
Omgeving
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -40 °C ~ +80 °C
Humidity 5 ~ 95% RH, non-condensing
Mijn vraag gaat over: ICPDAS PROFI-8855
To Top