ICPDAS PROFI-8155
Profibus Remote I/O Unit with 1 Expansion Slot
● Protocol & Hierarchy: DP-V0 Slave
● Detect transmission rate automatically (Max. 12Mbps)
● Support all I-8K & I-87K I/O Modules
● Support Device-Related & Channel-Related Diagnosis
● Address 0~126 set by rotary switches or SSA-Telegram
● Support Hot-Swap for I-87K High-Profile Modules
● Network Isolation Protection
● 3000VDC isolation protection on PROFIBUS side
● 4kV ESD Protection (contacting for any terminal)
The PROFI-8155 Remote I/O Unit is specially designed for the slave device of PROFIBUS DP protocol. It supports up to 1 slot for ICPDAS I-8k series, I-87k Low Profile series, and I-87k High Profiles series I/O modules.
In addition, we also provide hot-swap function for I-87k High Profiles series I/O modules. To setup network, users can choose and configure I/O modules by using the GSD file without any other setting tools.
APPLICATIONS:
● Industrial Automation
● Factory Automation
● Process Automation
CONFIGURATION FLOW & PROFI-8x55 STATE MACHINES:
| CPU | 80186, 80MHz |
| SRAM/Flash/EEPROM | 512KB / 512KB / 16KB |
| Watchdog Timer | CPU Built-In |
| Interface | 9-pin D-Sub (Female) |
| Controller | Siemens SPC3 |
| Transceiver | ADI ADM2486 iCoupler Isolated Transceiver |
| Transmission Rate | Up to 12Mbps |
| I/O Expansion Slot | 1 Slot |
| COM 1 | RS-232(F/W update port at JP1) |
| Power Requirement | 10V ~ 30V |
| Power Supply | 8 W |
| Power Consumption | 2.5 W |
| Dimensions (w x d x h) | 64 x 91 x 119mm |
| Operating Temperature | -25 °C ~ +75 °C |
| Storage Temperature | -30 °C ~ +85 °C |
| Humidity | 5% ~ 95% Non-condensing |
