ICPDAS PROFI-5018

Levertijd:
2~7 dagen
SKU
PROFI-5018

PROFIBUS Remote I/O Module

● Support for PROFIBUS DP-V0 protocol
● Detect transmission rate automatically(Max. 12Mbps)
● Support device-related & channel-related diagnosis
● Address 0~126 set by rotary switches or SSA telegram
● 16-bits resolution & 100ksps AD converter
● Network isolation protection
● 3000VDC isolation protection on PROFIBUS
● 4kV ESD protection (contact for any terminal)
● Wide range of power input (DC 10~40VDC) and operating temperature (-25°C~+75°C)

 

The I-2533CS is a local CAN bridge used to establish a connection between two CAN bus systems via single mode fiber optic. It can unleash the transmission distance limitation of the fiber optic due to the higher CAN baud rate.

That is to say that the total network distance can be extended. When applying the I-2533CS in the two CAN sub-network, the bus error on one CAN network don’t affect the operation of another CAN network, and the two CAN network can communicate with each other by using different CAN baud rate for highly flexibility. These features help users’ applications more powerful and flexible.

Meer informatie
Art.nr.
PROFI-5018
Fabrikant
ICPDAS
Hardware
CPU 80186, 80 MHz or compatible
SRAM/Flash/EEPROM 512 KB / 512 KB / 2 KB
Watchdog Watchdog IC, CPU built-in
ESD Protection 4 kV class A
PROFIBUS Interface
PROFIBUS Interface 9-pin D-Sub(Female)
PROFIBUS Controller Siemens SPC3
PROFIBUS Transceiver ADI ADM2486 iCoupler Isolated transceiver
Transmission Rate Up to 12Mbps
LED Indicators
-
Power
Power Requirement +10 ~ +40 VDC
Power Consumption 3.5 W
Mechanical
Dimensions 91 x 130 x 52 mm(W x L x H)
Omgeving
Operating Temp. -25 ~ +75 °C
Storage Temp. -30 ~ +80 °C
Humidity 5 ~ 95% RH ,non-condensing
Mijn vraag gaat over: ICPDAS PROFI-5018
To Top