I-7540D CAN-Ethernet Gateway ICPDAS

Levertijd:
Uit voorraad leverbaar
SKU
I-7540D-G

Internet communication controller with one CAN bus, one RS-232, one RS-485 and one Ethernet

 

● 80186-80 Embedded CPU, or compatible
● Ethernet Protocols, TCP, UDP, IP, ICMP, ARP
● 10/100 Base-TX Ethernet Controller
● Reloadable Operating Software
● Message transmitted by using TCP/IP protocol
● Diagnostics
● COM driver support interrupt & 1K QUEUE Input & Output buffer
● Support one RS-232 port, one RS-485 port and one CAN port
● 2500 Vrms photo-isolation protection on CAN side
● Jumper select 120 Ω terminator resistor for CAN channel

 

Internet communications using TCP/IP is increasing in the industrial sector. Using Ethernet for network in industrial area is appealing because the required cabling is already installed. The CAN-Ethernet Gateway from ICP DAS is a solution that enables CAN networks to be coupled together over the Internet/Ethernet, whereby remote monitoring and control is possible. The CAN-Ethernet Gateway controls networked communication and makes a transparent CAN-based application interface available to the user.

 

The device supports a transparent, protocol-independent transfer of the CAN messages, thus allowing its implementation into a wide range of possible applications.

 

Furthermore, the CAN-Ethernet Gateway can be used with various higher layer CAN protocols (e.g. CANopen, DeviceNet or other proprietary protocols). The following figure shows the application architecture for CAN-Ethernet Gateway . Furthermore, I-7540D also can be used as Ethernet to CAN/RS-232/485 Device Server. The Device Server is an appliance that network enables any device with a serial communication port.

By virtue of its independent operating system, protocol independence, small size and flexibility, Device servers are able to meet the demand of virtually any network-enable application. Most devices don't have network ports. I-7540D allows those devices to become connected to the network.

 

https://fieldworks.nl/media/imageproducts/icpdas/I-7540D_App1.jpg
https://fieldworks.nl/media/imageproducts/icpdas/I-7540D_App2.jpg
https://fieldworks.nl/media/imageproducts/icpdas/I-7540D_App3.jpg

 

APPLICATIONS:

● Control System
● Building Automation
● Home Automation
● Control System
● Monitor System
● Vehicle Automation

 

https://fieldworks.nl/media/imageproducts/icpdas/photo.gif

Meer informatie
Art.nr.
I-7540D-G
Fabrikant
ICPDAS
CAN Interface
Controller NXP SJA1000T with 16 MHz clock
Transceiver NXP 82C250
Channel Number 1
Connector 2-pin screwed terminal block (CAN_L, CAN_H)
Baud Rate 10k, 20k, 50k, 125k, 250k, 500k, 800k, 1M (allow user-defined baud rate)
Isolation 1000V DC for DC-to-DC, 2500 Vrms for photo-couple
Terminator Resistor Jumper for 120Ω terminator resistor
Specification ISO-11898-2, CAN 2.0A and CAN 2.0B
UART Interface
COM 1 RS-232
COM 1 Connector 5-pin screwed terminal block (TxD, RxD, RTS, CTS, GND )
COM 2 RS-485 (Self-turner inside)
COM 2 Connector 2-pin screwed terminal block (DATA+, DATA-)
Baud Rate 110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
Data Bit 7, 8
Stop Bit 1
Parity None, Even, Odd
Ethernet Interface
Controller 10/100Base-TX Ethernet Controller (Auto-negotiating, Auto_MDIX)
Connector RJ-45 with LED indicator
Power
Power Supply Unregulated +10 ~ +30 VDC
Protection Power reverse polarity protection, Overvoltage brownout protection
Power Consumption 2.5W
Mechanical
Installation DIN-Rail
Dimensions (w x l x h) 72 x 33 x 122mm
Omgeving
Operation Temperature -25 °C ~ +75 °C
Storage Temperature -40 °C ~ +80 °C
Humidity 5 ~ 95% RH, non-condensing
Mijn vraag gaat over: I-7540D CAN-Ethernet Gateway ICPDAS
U bent wellicht ook geïnteresseerd in de volgende producten:
To Top