Toggle Nav
Search
Geavanceerd zoeken
NL EN

Bel gerust! 073 - 624 1111

  • Vergelijken
NL
Cart
Mijn offerte

ICS Dual Serial Module VXI-5562

Levertijd:
3~4 weken
SKU
VXI-5562

VXI Dual Binary Serial Module

● Sends and receives 16-bit word and arbitrary bit length messages with baud rates up to 9 Mbs. Handles most binary formats at high transfer rates.
● Multiple transmission modes and programmable gate and clock outputs. Duplicates most serial protocols.
● Receiver inputs data upon command on when a sync pattern is detected. Captures both types of messages.
● Register based interface has fast VXIbus data transfer rate. Reduces VXIbus transfer time.
● Large TX and RX FIFO's hold 2 Mbytes. Enough data for a complete test sequence.
● Internal Baud Rate Generators covers a 1 to 10 MHz range. Provides all clock rates.
● Transmission can be triggered with external or VXIbus triggers. Easily controllable in a test system.
● Custom protocols with special firmware. Adapts module to your special test needs.

Brochure EN

ICS Dual Channel Serial Module VXI-5562 is a single slot, C-size VXI module with two channels for sending and receiving serial binary messages at rates up to 9 Mbs. Each serial channel has large FIFOs for buffering transmit and receive data. The channel's transmit and receive logic has multiple operating modes that let it create many serial protocols and duplicate other serial devices. Each channel can transmit and receive data with various combinations of clock and data-gate signals through RS-422 or LVDS interfaces. The serial clock for both channels can be supplied by an internal frequency generator or by an external clock from an SMA connector on the module's front panel. The VXI-5562 is a register based VXI module and can transfer data at rates up to 16 Mbs over the VXIbus. Applications include test systems or command and telemetry applications.

Meer informatie
Art.nr.
VXI-5562
Fabrikant
ICS Electronics
GPIB Capabilities
VXI Capabilities
Static address capability.
Register based instrument.
A16 address space.
D16 bit data.
Normal handshake data transfer.
Diagnostic Capability Includes internal and external data loopback and front panel LEDs for VXI status and troubleshooting.
Transmission Modes
Each channel has the following transmit modes:
16-bit word messages
Arbitrary length messages
Continuous transmission
Single message transmission
Trigger Enabled transmission
Transmit on received message
External trigger/VXI trigger select
Gated Enable signal
Gated TX clocks
Fill enable
Partiy bit enable
Odd/Even Parity Select
RS-422/LVDS drivers select
Receive Modes
Each channel has the following test modes:
Receive enable
Sync detect enable
8/16/24/32 bit compare select
Positive RX clock
Test Modes
Each channel has the following test modes:
Clock and Enable loopback
Data loopback
External loopback
Controls and Indicators
Indicators
Common LEDs PWR, ACCES, FAILED and SYSFAIL
Channel LEDs TX DATA, RX DATA, SYNCDET and TEST MODE
Interface Specifications
Serial Interface Transmits and receives serial bit streams, Transmit/receive logic supports RS-422 and LVDS interface drivers and receivers. Receiver inputs data upon command, when gate or clock received or when sync pattern detected.
Serial Signals
Transmit Data, clock, and enable
Receive Data, clock, and enable
Signal Type Differential RS-422 or LVDS signals.
TX Rate
Maximum rate depends upon selected transmission options.
16-bit word messages > 9 MHz
Arbitrary length messages > 5 MHz
Fill Enabled >5.9 MHz
Message Lengths
Data 2 to 2 Mbytes
Data Timing
TX Data bit change on positive clock edge
RX Data read on negative or positive clock edge
Trigger Sources
Internal clock derived from internal oscillator or VXI 10 MHz clock
Front panel clock input a 50 Ω load
Clock Sources
Internal clock derived from internal oscllator or VXI 10 MHz clock.
Front panel clock input into a 50 Ω load
Sync Detector 8, 16 24 or 32 bits
FIFO Data Storage
Each serial channel has separate transmit, receive and fill FIFOs
Data FIFOs 2 Mbytes
Fill FIFO 1,024 bytes
Internal Clock Generator
Frequency synthesizer type generator based on internal 33.12 MHz oscillator or VXIbus 10 MHz reference. The Internal Clock Generator is programmable from 1 to 10 MHz.
Grootte
30.5 x 233.5 x 353.0mm
Power
Power Consumption +5 VDC @ 2 Amp.
Mechanical
Connectors
Serial DB-25S connectors with lock studs/channel
Ext. Trigger SMA connector/channel
Ext. Clock SMA connector
Included Accessories
Instruction Manual
Mijn vraag gaat over: ICS Dual Serial Module VXI-5562
U bent wellicht ook geïnteresseerd in de volgende producten:
To Top