CWE Blood Pressure Monitor BP-100

Levertijd:
2~4 Weken
SKU
BP-100

BP-100 Blood Pressure Monitor

The BP-100 Blood Pressure Monitor is an accurate, easy-to-use instrument for measuring direct blood pressure (BP) from small animals. It is designe to operate using standard, widely available clinical-type BP transducers (included with unit). In addition, miniature catheter-tip transducers are available for high-resolution intra-arterial BP measurements. The standard systolic, diastolic and mean pressures are reported, along with heart rate (HR).

 

The BP-100 features automated operation, including push-button transducer zeroing. High and low-pressure alarms are user-adjustable. A serial data output is provided for remote data collection. Analog voltage outputs for fast (continuous signal), systolic, diastolic, and HR are compatible with data acquisition systems. All computed measurements are updated every 2.5 seconds. A special fast mode can be selected, where the display is rapidly updated. This mode allows the BP-100 to be used as a general-purpose transducer amplifier for recording signals other than arterial BP.

Meer informatie
Art.nr.
BP-100
Fabrikant
CWE
Land van herkomst
Verenigde Staten
Specifications
Input Type

Differential instrumentation amplifier, 1 MΩ impedance

Excitation Voltage 5.0 VDC
Transducer Compatibility DC bridge-type
Transducer Input Jack 6-pin WK6-32S
Transducer Output (Nominal) 5 uV/V/mmHg
Pressure Measurement Range 0 ~ 310 mmHg
Frequency Response 1 kHz
Pressure Accuracy ±1 mmHg
Pressure Resolution (Displayed) 1 mmHg
Pressure Resolution (Analog Outputs) 0.1 mmHg
Pressure Signal, Systlic, Diastolic Analog Output Scaling 10 mV/mmHg
Heart Rate Analog Output Scaling 5 mV/bpm
Output Impedance (All Outputs) 10 Ω
Analog Output Connectors BNC Jacks
Serial Data Output Format 9600 baud, 8 data bits, no parity, 1 stop bit
Serial Output Connector (rear panel) 3.5 mm 3-cond mini phone plug
Display Vacuum florescent graphic display
Size (W x H x D)
230 x 63 x 180 mm
CWE Blood Pressure Monitor BP-100 aanpassen
Blood Pressure monitor with transducer

* Verplichte velden

Uw configuratie
BP-100 Blood Pressure Monitor
CWE Blood Pressure Monitor BP-100
Overzicht
    Mijn vraag gaat over: CWE Blood Pressure Monitor BP-100
    To Top