2~7 dagen

XP-8000-CE6 Programmable Automation Controller with InduSoft inside



● InduSoft Web Studio General Features
● InduSoft Integrated with XP-8000-CE6
● Access Database Easily
● SNMP Protocol Supported
● Web Thin Clients
● Useful Package Tool is Provided



● AMD LX800 CPU (32-bit and 500MHz)
● 1 GB RAM
● 4 GB Built-In Flash Disk
● Built-in VGA Port
● 64-bit Hardware Serial Number
● Dual Watchdog Timer
● Dual Battery-Backup SRAM (512 KB)
● Dual Ethernet Port
● Redundant Power Input
● Ventilated Housing Design Allows Operation Between -25 °C ~ +75 °C

XP-8049-CE6 is the new generation Windows CE 6.0 based InduSoft PAC (Programmable Automation Controller) of ICP DAS. InduSoft is the most powerful, integrated collection of e-automation development tool that includes all the building blocks needed to develop HMI (Human Machine Interface) and SCADA (Supervisory Control and Data Acquisition system.

ICPDAS PAC XP-8049-CE6 equips a AMD LX 800 CPU (500MHz), variant connectivity (VGA, USB, Ethernet, RS-232/RS-485), and 3/7 slots for high performance parallel I/O modules (high profile I-8K series) and serial-type I/O modules (high profile I-87K I/O modules). Its operating system, Windows Embedded CE 6.0 is an operating system with resource saving and real-time capability as their main features. To develop XP-8000-CE6, the time spent for development is not much especially with our SDK and pluggable IO modules.

Meer informatie
OS Microsoft Windows Embedded CE 6.0
Preloaded Software InduSoft Web Studio v6.1 Service Pack 6 (NTView Pro: 300 Tags, 3 Drivers ,and 4 Web Thin Clients)
CPU AMD LX800 processor (500 MHz)
System Memory 1 GB RAM
Dual Battery Backup SRAM 512 KB (for 5 years data retain)
Flash 4 GB as IDE Master
16 KB
Data Retention: 40 years; 1,000,000 erase/write cycles
CF Card 8 GB (support up to 32 GB)
64-bit Hardware Serial Number Yes
Dual Watchdog Timer Yes
Rotary Switch Yes (0 ~ 9)
DIP Switch No
Communication Ports
VGA Yes (resolution: 1600x1200, 1024x768, 800x600, 640 x480)
Ethernet Port
RJ-45 x 2, 10/100 Base-TX Ethernet Controller
(Auto-negotiating, auto MDI/MDI-X, LED indicator)
USB 2.0 2
COM1 RS-232 (RxD, TxD and GND); non-isolated
COM2 RS-232 (RXD, TXD and GND); Non-isolation
RS-485 D2+, D2-; self-tuner ASIC inside
Isolation 3000 VDC
COM4 RS-232/RS-485 (RxD, TxD, CTS, RTS and GND for RS-232, Data+ and Data- for RS-485); non-isolated
COM5 RS-232 (RxD, TxD, CTS, RTS, DSR, DTR, CD, RI and GND); non-isolated
I/O Expansion Slots
Slot Number 0
Hot Plug N/A
Input Range +10 ~ +30 VDC
Isolation 1 kV
Redundant Power Input Yes, with one power relay (1 A @ 24 VDC) for alarm
Capacity 1.8A, 5V supply to CPU and backplane, total 15 W
Consumption 14.4 W (0.6 A @ 24 VDC)
Dimensions (w x l x h) 137 x 132 x 125mm
Installation DIN-Rail or Wall Mounting
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -30 °C ~ +85 °C
Humidity 5% ~ 90% RH, non-condensing
ICPDAS XP-8049-CE6 aanpassen

* Verplichte velden

Uw configuratie
XP-8000-CE6 Programmable Automation Controller with InduSoft inside
    Mijn vraag gaat over: ICPDAS XP-8049-CE6
    To Top