2~7 dagen

1-channel Thermocouple Input Module

● 3000 VDC Isolated analog input.
● 24-bits sigma-delta ADC to provide excellent accuracy.
● Thermocouple direct connect with built-in CJC
● Software calibration
● Dual Watchdog

I-7000 is a family of network data acquisition and control modules. They provide analog-to-digital, digital-to-analog, digital input/output, timer/counter and other functions. These modules can be remote controlled by a set of commands. The common features of analog input modules are given as follows:

The ICPDAS Thermocouple Input Module I-7011 is a One-channel Thermocouple Input Module.

Meer informatie
Analog Input
Input Channels 1
Input Type
±15 mV, ±50 mV, ±100 mV,± 500 mV , ±1 V,± 2.5 V
± 20 mA (requires optional external 125 Ω resistor)
Thermocouple (Type J, K, T, E, R, S, B, N, C)
Resolution 16-bit
Sampling Rate 10 samples/sec
Accuracy ±0.5 uV/°C
Zero Drift ±0.5 uV/°C
Span Drift 25 ppm/°C
Bandwidth 5.24 Hz
Common Mode Rejection 150 dB
Normal Mode Rejection 100 dB
Input Impedance 20 MΩ
Intra-module Isolation, Field to Logic 3000 VDC
Digital Input
Channels 1
Logic Level 0 +1 V max
Logic Level 1 +3.5 ~ 30V
Max. Input Frequency 50 Hz
Min. Pulse Width 1 ms
Digital Output
Channels 2
Output Type Sink, Open Collector to 30 V
Output Load 30 mA max. per channel
Power Dissipation 300 mW
Interface RS-485
Format N, 8, 1
Baudrate 1200 ~ 115200 bps
LED Indicators
LED Power/ Communication
Input +10 ~ +30 VDC
Power Consumption 0.9 W
Operating Temperature -25 °C ~ 75 °C
Storage Temperature -30 °C ~ 75 °C
Humidity 5 ~ 95%, non-condensing
Mijn vraag gaat over: ICPDAS I-7011
U bent wellicht ook geïnteresseerd in de volgende producten:
To Top