Wij gebruiken cookies om uw ervaring beter te maken. Om te voldoen aan de cookie wetgeving, vragen we uw toestemming om de cookies te plaatsen. Meer informatie.
ICPDAS PAC iP-8447
Levertijd:
2~7 dagen
SKU
iP-8447
4 slots Faster CPU (80 MHz) Dual Ethernet ISaGRAF PAC
SOFTWARE FEATURES:
● MiniOS7 Embedded Operating System (DOS-like)
● ISaGRAF Ver.3 SoftLogic Inside
● Support IEC 61131-3 Standard
● Accepts max. 64 KB ISaGRAF code size
HARDWARE FEATURES:
● 80186 CPU (16-bit & 80 MHz)
● Dual Battery Backup SRAM (512 KB)
● 64-bit Hardware Serial Number for Protection
● 4 Expansion Slots (support High Profile I/O Modules)
● Support I/O Module Hot Swap
● Dual 10/100M Ethernet Ports
● 4 Serial Ports (RS-232/485)
● Redundant Power Inputs
<p>ICPDAS 8000 Series PAC iP-8447 is a Dual Ethernet ISaGRAF SoftLogic PAC (Programmable Automation Controller) of ICP DAS iPAC-8000 series. It is equipped with an 80186, 80 MHz CPU running a MiniOS7 operating system, various connectivity including Dual 10/100 Base-TX Ethernet Ports, one RS-232/485 port, one RS-485 port and two RS-232 ports, and 4/8 slots for high performance Parallel-type I/O modules (High profile I-8K series) and high performance Serial-type I/O modules (Hot-Swap High Profile I-87K series), etc. Compared with I-8xx7, ICPDAS 8000 Series PAC iP-8447 is 2 ~ 4 times faster!</p>
Meer informatie
Art.nr.
iP-8447
Fabrikant
ICPDAS
Software
| OS | MiniOS7 |
Development Software
| ISaGRAF Software | ISaGRAF v3: IEC 61131-3 standard. Languages: LD, ST, FBD, SFC, IL & FC |
| Max. Code Size | Accepts max. 64 KB ISaGRAF code size (Appli.x8m must < 64 KB) |
Systeem
| CPU | 80186, 80 MHz (16-bit) or compatible. |
| Watchdog Timer | Yes, Default = 0.8 second |
| RTC (Real Time Clock) | Provide second, minute, hour, date, day of week, month, year |
| SRAM | 768 KB |
| Dual Battery Backup SRAM | 512 KB (for 5 years data retention), support up to 1024 retain variables. |
| FLASH Memory | 512 KB, 100.000 erase/write cycles with Flash protection switch. |
| NVRAM | 31 bytes, battery backup, data valid up to 5 years. |
| EEPROM | 16K, retention > 40 years; 1.000,000 erase/write cycles. |
| Serial Number | Yes, 64-bit Hardware Serial Number. |
| NET ID | 8-pin DIP switch to set NET ID as 1 ~ 255. |
Communication Ports
| Ethernet |
|
||
| COM1 | RS-232: TxD, RxD, GND; Speed: 115200 bps max. Program downloads port. | ||
| COM2 | RS-485: D+, D-; Speed: 115.200 bps max.; 3000 VDC Isolated | ||
| COM3 |
|
||
| COM4 | RS-232: TxD,RxD,RTS,CTS,DSR,DTR,CD,RI,GND. Speed: 115200 bps max. Full modem signals. |
MMI (Man Machine Interface)
| Modbus RTU/ASCII Master Protocol | Up to 2 COM Ports, COM1 ~ (COM5 in multi serial port board) can support Modbus RTU Master or ASCII Master protocol to connect to other Modbus Slave devices. Max. Modbus_xxx Function Block amount for 2 ports: 128. |
| Modbus RTU Slave Protocol |
Up to 2 COM Ports, COM1 and one of (COM2, COM3) can support Modbus RTU Slave protocol for connecting ISaGRAF, PC/HMI/OPC Server & MMI panels. |
| Modbus TCP/IP Slave Protocol |
2 Ethernet ports support Modbus TCP/IP Slave Protocol for connecting ISaGRAF & PC/HMI. (Max. 6 connections) |
| Remote I/O | One of COM2 or COM3 or COM4 supports I-7000 I/O modules & [(I-87Kn base or RU-87P1/2/4/8)+ I-87K High Profile I/O boards] as Remote I/O. Max. 64 Remote I/O module for one PAC. |
| Fbus | Built-in COM3 Port to exchange data between ICP DAS's ISaGRAF PACs. |
| Ebus | To exchange data between ICP DAS's ISaGRAF Ethernet PACs via Ethernet port. (The LAN2: upper port ONLY) |
| SMS: Short Message Service |
One of COM4 or (COM5 in multi serial port board) can link to a GSM modem to support SMS. User can request data/control the controller by cellular phone. The controller can also send data & alarms to user's cellular phone. Optional GSM/GPRS modem: GTM-201-RS232 (850/900/1800/1900 GSM/GPRS External Modem) |
| User-defined Protocol | User can write his own protocol applied at COM1, COM2, COM3, COM4 (& COM5 ~ COM20 if multi-serial port boards are plugged) by serial communication function blocks. |
| MMICON/LCD | One of COM3 or COM4 supports ICP DAS's MMICON. The MMICON is featured with a 240 x 64 dot LCD and a 4 x 4 Keyboard. User can use it to display picture, string, integer, float, and input a character, string, integer and float. |
| Redundant Bus7000 | Two ISaGRAF PACs can link to remote I-7000 & I-87K High profile I/O modules at the same time. Only one controller is active to control these Remote I/Os. If one is dead, the other one will take over the control of Remote I/Os. |
| CAN/CANopen | iP-8x47 can use its COM1,3,4 or (COM5 ~ COM12 resides at the I-8112iW/8114W/8114iW RS-232 expansion board) to connect one I-7530 : the RS-232 to CAN converter to support CAN and CANopen devices and sensors. One iP-8x47 supports max.3 RS-232 ports to connect max.3 I-7530. |
| FRnet I/O | Support Max.4 I-8172W FRnet Master cards to connect FRnet I/O modules. (Max. 1024-ch. DI + 1024-ch. DO) |
| Sending E-mail | Actively or passively sending E-mail via Ethernet port through internet. Max.10 receivers for each sending and can send E-mail with an attached file. (Max. file size is about 488 KB) |
SMMI
| Yes, on the front panel. 4 push buttons, 3 green programmable LEDs, 1 red power LED and 5-digit 7-Seg. LED (Display message, value, input value, simulate input & output.) |
I/O Expansion Slots
| Slot Number |
|
||
| Hot-Swap | Support Hot-Swap I-87K high profile I/O module on the slot 0 ~ 7 if the module needs to be replaced. |
Motion
| Motion Control | One I-8091W (2-axis) or two I-8091W (4-axis) to do motion control. Ethernet communication is also available when doing motion control. |
PWM Output
| High Speed PWM Module | I-8088W: 8-channel PWM outputs, software support 1 Hz ~ 100 KHz (non-continuous), duty: 0.1 ~ 99.9% |
||
| DO Module as PWM |
|
Counter
| Parallel DI Counter |
|
||||
| Serial DI Counter |
|
||||
| Remote DI Counter | All remote I-7000 & I-87K DI modules support counters. 100 Hz max. value: 0 ~ 65535. | ||||
| High Speed Counter |
|
||||
| Encoder |
|
||||
| Frequency |
|
Power
| Input Range | +10 ~ +30 VDC |
| Isolated | 1 kV |
| Redundant Power Inputs | Yes, with one power relay (1 A @ 24 VDC) for alarm. |
| Capacity | 0.85 A, 5 V supply to CPU; 5.51 A, 5 V supply to I/O expansion slots, 30 W in total. |
| Power Consumption | 6.7 W (0.28 A @ 24 V) |
Mechanical
| Dimensions (w x l x h) | 230 x 132 x 98mm |
Omgeving
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90 % RH (non-condensing) |
Gerelateerde producten
U bent wellicht ook geïnteresseerd in de volgende producten:
