ICPDAS CAN-2015C

Levertijd:
2~7 dagen
SKU
CAN-2015C

CANopen Slave Module of 8-channel RTD Inputs

● Default EDS file
● Passed the validation of CiA CANopen Conformance
● Test tool
● ESD Protection 4 KV Contact for each channel
● Support Power Supply +10 ~ +30 VDC
● Support CiA-301 v4.02, CiA-401 v2.1
● Support Dynamic PDO

CANopen is one kind of the network protocols based on the CAN bus and mainly used for embedded network system, such as industrial machine control , vehicle control system, factory automation, medical equipment control, remote data acquisition, environmental monitoring, and packaging machines control, etc.

The CAN-2015C is a CANopen slave which follows the CiA 301 version 4.02 and CiA 401 version 2.1. This module provides 8 RTD input channels, and users can obtain the RTD input data or configure the CAN-2015C via the standard CANopen protocol. In order to be fully compatible with other CANopen devices, the CAN-2015C has passed the validation of the CiA CANopen Conformance Test tool. Therefore, it is very easy to integrate the CAN-2015C with the standard CANopen master by applying the EDS file. Combining with the CANopen masters of ICP DAS, you can quickly build a CANopen network to approach your requirements.

Meer informatie
Art.nr.
CAN-2015C
Fabrikant
ICPDAS
CANopen Interface
Connector 5-pin screwed terminal block (CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+)
Baud Rate (bps) 10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 M, selected by rotary switch
Terminator Resistor DIP switch for the 120 Ω terminator resistor
Protocol CANopen CiA 301 ver4.02, CiA 401 ver2.1
Node ID 1~99 selected by rotary switch
NMT Slave
Error Control Node Guarding protocol/heartbeat producer
SDOs 1 server, 0 client
PDOs 10 RxPDO, 10 TxPDO (Supports dynamic PDO)
PDO Modes Event-triggered, remotely-requested, synchronous (cyclic), synchronous (acyclic)
Baud Rate (bps) 10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, and 1 M
Node ID 1 ~ 99
Emergency Message Yes
EDS file Yes
Analog Output
Output Channels 8 channels for 2-wire or 3-wire RTD
Input Type Pt100, Pt1000, Ni120, Cu100, Cu1000, JPt100
Resolution 16-bit
Accuracy ± 0.05 % FSR
Zero Drift +/- 0.5 μV/ °C
Span Drift ± 20 ppm/°C
LED Indicators
LEDs PWR LED, RUN LED, ERR LED, 8 LEDs for the AI high alarms or low alarms
Power
Power Supply Unregulated +10 ~ +30 VDC
Power Consumption 1.5 W
Mechanical

 

Installation DIN-Rail
Dimensions (w x l x h) 33 mm x 99 mm x 78 mm
Omgeving
ESD Protection Contact 4 kV class A
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -30 °C ~ +80 °C
Humidity 10 ~ 90% RH, non-condensing
Mijn vraag gaat over: ICPDAS CAN-2015C
U bent wellicht ook geïnteresseerd in de volgende producten:
To Top