CANopen Slave Module of 16-channel Isolated Sink/Source Digital Input - CAN-2053C

2~7 dagen

CANopen Slave Module of 16-channel Isolated Sink/Source Digital Input


● NMT Slave
● Providing I/O Pair-connection Function
● Provide default EDS file
● Passed the validation of CiA CANopen Conformance Test tool
● Support Polarity Output Setting and Save
● Support Error Value Output Setting and Save
● Support Dynamic PDO
● Support Application: PNP, NPN, TTL, and Relay Contact
● ESD Protection 4 kV Contact for each channel


CAN-2053C module follows the DS-301 version 4.02 and DSP-401 version 2.1. You can access the digital input status and set the configuration by using standard CANopen protocol. CAN-2053C has passed the validation of the CiA CANopen Conformance Test tool. Therefore, you can use it with standard CANopen master easily by applying the EDS file.

CAN-2053C has 16-channel isolated sink/source input. It can be used to various applications, such as PNP, NPN, TTL, relay contact and so forth. By owing to the CANopen masters of ICP DAS, you can quickly build a CANopen network to approach your requirements.



Alarm detector
Switch detection
● I/O pair-connection

Meer informatie
CANopen Interface
NMT Slave
Error Control Node Guarding protocol / Heartbeat Consumer
No. of PDOs 10Rx , 10Tx
PDO Modes Event Triggered, Remotely requested, Cyclic and acyclic SYNC
PDO Mapping Available
No. of SDOs 1 server, 0 client
Emergency Message Yes
CANopen Version DS-301 v4.02
Device Profile DSP-401 v2.1
Specification ISO-11898-2, CAN 2.0A and CAN 2.0B
Baud Rate 10k, 20k, 50k, 125k, 250k, 500k, 800k, and 1M
Node ID 1 ~ 99
Terminator Resistor Switch for 120Ω terminator resistor
Connector 5-pin screwed terminal block (CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+)
EDS file Yes
Digital Input
Channels 16 (Sink/Source)
On Voltage Level 3.5 ~ 30V DC
Off Voltage Level +1VDC max.
Input Impedance 3kΩ, 0.3W
Intra-module Isolation 3750Vrms
ESD Protection 4kV contact for each channel
LED Indicators
CANopen Status 3 LEDs for PWR/RUN/ERR
Terminal Resister 1 LED as terminal resister indicators
DI LED 16 LEDs as digital input indicators
Power Supply Unregulated 10 ~ 30V DC
Power Consumption 1.5W
Installation DIN-Rail
Dimensions (w x l x h) 32.3 x 99 x 77.5mm
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -30 °C ~ +80 °C
Humidity 10 ~ 90% RH, non-condensing
Mijn vraag gaat over: CANopen Slave Module of 16-channel Isolated Sink/Source Digital Input - CAN-2053C
U bent wellicht ook geïnteresseerd in de volgende producten:
To Top