Wij gebruiken cookies om uw ervaring beter te maken. Om te voldoen aan de cookie wetgeving, vragen we uw toestemming om de cookies te plaatsen. Meer informatie.
Watchdog Boards

The WDT-01/WDT-02 are watchdog card that provides watchdog timer, temperature monitor and power monitor functions. It also provides many signals and mechanism such as relay control, reset signal, power-good signal that allow the user to control their system as soon as the errors are occurred. There are also many signals, such as IRQ, I/O status RS-232, LED, Buzzer, will tell the user or operator that some errors are occurred. Once the WDT-01 has been power on, it will monitor the power and the temperature of PC automatically. After the software enable the watchdog timer, the WDT-01 will monitor the operations of software and hardware in the most inexpensive cost with the excellent protections. The WDT-02 is an economical version of WDT-01.Refer to the following comparison table.
It's a fact that the PC hardware and software may fail. To prevent the failure,many different solutions are proposed. However, none of these solutions offer a 100% assurance. Since it's hard to prevent the failure, to detect the failure becomes more and more important. The WDT-03 is used to detect the failure of the software and hardware. It can be used to reduce the risk of PC failure. The WDT-03 is useful even for those systems with built-in watchdog circuit.
- ICPDAS DB-3R
Daughter Board for WDT-03
● 3-channel of digital input terminal
● 3-channel of relay output
● Connects directly to WDT-03 (Only the versionsthat come out after v5.2, including v5.2 supportDB-3R)
● Relay output of specifications:
Channels : 3 (Form "A", Normal Open)
Max. Switching voltage: 220VDC, 250VAC
Max. Switching current: 2A
Max. Carrying current: 2A
Surge Strength: 1,500V
Electrical endurance: Typical 500,000 operation at 30VDC / 1A; Typical 100,000 operation at 125VAC / 0.5A
Relay on time (typical) : 6ms
Relay off time (typical) : 6ms
● Pin to Pin screw terminal for D-Sub (From the CN2 of WDT-03)
● Pitch: 5.08 m/m
● Dimension: 103 x 86mm - ICPDAS WDT-03
Intelligent Watchdog Timer card
● Don't have to modify the original program
● Can be used in ISA bus, PCI bus & any system with RS-232 interface
● Harsh environment detection & warning before system crash
● Cost Effective Solution