ICPdas Web-based Intelligent Multifunction IoT Controller - WISE-5231

2~7 dagen

Intelligent Multifunction IoT Controller

● IF-THEN-ELSE logic rules execution ability
● Support XV-board
● Support DCON or Modbus RTU Slave devices (Up to 32)
● Support Modbus TCP Slave devices (Up to 16)
● SSL/TLS Email sending function supported
● Timer and Schedule functions supported
● Data logger and data files send back function supported
● Active I/O sending function for real-time data transfer
● CGI Command sending and receiving function supported for IP Camera and Network device
● Support Modbus TCP/RTU protocol for SCADA software integration
● SNMP, SNMP Trap, MQTT and DDNS function supported


WISE(Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications.
WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the labor and cost spent on system development.
 WISE-5231 provides more supports in I/O functions. It allows connections to XV-board; supports DCON I/O modules, Modbus RTU Slave modules and Modbus TCP Slave modules together.
The wide range of selection options enables flexibility in I/O module integration to meet the requirements from various applications. WISE-5231 provides Data Logger function to record the I/O channel data by periodic cycle or event trigger. And it allows to send the data files by FTP to the control center. In addition to the CGI command sending function, WISE-5231 now supports the CGI command receiving function that allows the devices (such as IP camera) connected to the network to trigger the operation of IF-THEN-ELSE logic rule of WISE-5231. The well thought-out CGI command functions make WISE-5231 being able to interact with the devices flexibly in the network environment. WISE-5231 also supports SNMP, SNMP Trap, MQTT and DDNS protocols and services. The flexible integration ability with the SCADA and IT software or devices and the reliable ability of real-time I/O logic control and data logger make WISE-5231 the most cost-effective I/O controller in the IoT (Internet of Thing) Age.

Meer informatie
CPU 32-bit ARM CPU
Software Built-in WISE Firmware
microSD Expansion Built-in one 4 GB microSD card (support up to 32 GB microSDHC card)
RTC (Real Time Clock) Yes
Communication Ports
Ethernet RJ-45 x 1, 10/100 Base-TX (Auto-negotiating, Auto MDI/MDI-X, LED indicators)
COM 1 RS-232 (TxD, RxD, GND), non-isolated, Speed: 115200 bps max
COM 2 RS-232 (TxD, RxD, GND), non-isolated, Speed: 115200 bps max.
COM 3 RS-485 (Data+, Data-), non-isolated, Speed: 115200 bps max.
COM 4 RS-485 (Data+, Data-), 2500 VDC isolated, Speed: 115200 bps max.
LED Indicators
Power LED Red
System LED Yes (Red, Green)
Hardware Expansion
Local I/O Module Yes, one XV-board
Remote I/O Module COM3 can connect to Max.16 DCON or Modbus RTU Slave modules;
COM4 can connect to Max.16 DCON or Modbus RTU Slave modules;
LAN interface can connect to Max. 16 Modbus TCP Slave modules.
Input Range +12 ~ +48 VDC
Power Consumption 4.8W
Dimensions (w x h x d) 91 x 132 x 52 mm
Installation DIN-Rail Mounting
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -30 °C ~ +80 °C
Humidity 10 ~ 90% RH (non-condensing)
Mijn vraag gaat over: ICPdas Web-based Intelligent Multifunction IoT Controller - WISE-5231
To Top