I/O Units

Modbus/TCP I/O Unit with 8 slots

● Supports IPv4
● Supports Modbus/TCP communication protocol at Ethernet port
● Supports Modbus/RTU communication protocol at RS-232 port
● Supports 8K and 87K series DI/DO/AI/AO/Counter/Frequency modules
● I/O configurable via the Ethernet (Using the Modbus Utility)
● I/O scan engine (The engine can automatically scan I/O modules plug in slots and range I/O registers address to continuous to have high-data-density registers to get best communication efficiency)
● Support power on value and safe value for analog/digital output module
● Detection of I/O module communication status (online/offline)
● The SMMI of the panel can be used to configure the network setting (IP, Mask, Gateway) and/or set the offset value of AI/AO module
● Allowed a maximum of 8 host PCs access simultaneously
● Firmware updateable (via the RS-232 port)
● Firmware programmable

Modbus/TCP I/O Unit with 4 slots

● Supports IPv4
● Supports Modbus/TCP communication protocol at Ethernet port
● Supports Modbus/RTU communication protocol at RS-232 port
● Supports 8K and 87K series DI/DO/AI/AO/Counter/Frequency modules
● I/O configurable via the Ethernet (Using the Modbus Utility)
● I/O scan engine (The engine can automatically scan I/O modules plug in slots and range I/O registers address to continuous to have high-data-density registers to get best communication efficiency)
● Support power on value and safe value for analog/digital output module
● Detection of I/O module communication status (online/offline)
● The SMMI of the panel can be used to configure the network setting (IP, Mask, Gateway) and/or set the offset value of AI/AO module
● Allowed a maximum of 8 host PCs access simultaneously
● Firmware updateable (via the RS-232 port)
● Firmware programmable

Modbus/TCP Embedded Controller with 8 empty slots (80MHz CPU)

● Supports Modbus/RTU to Modbus/TCP converter
● Supports VxComm technique for every COM port of controllers
● Supports 8K and 87K DI/DO/AI/AO modules
● Automatically scan I/O modules and range I/O registers address to continuous
● Support power on value and safe value for analog/digital output module
● Allowed several host PCs( client ) access simultaneously
● Firmware modifiable

Modbus/TCP Embedded Controller with 4 empty slots (80MHz CPU)

● Supports Modbus/RTU to Modbus/TCP converter
● Supports VxComm technique for every COM port of controllers
● Supports 8K and 87K DI/DO/AI/AO modules
● Automatically scan I/O modules and range I/O registers address to continuous
● Support power on value and safe value for analog/digital output module
● Allowed several host PCs( client ) access simultaneously
● Firmware modifiable

Modbus/TCP Embedded Controller with 8 empty slots

● Supports Modbus/RTU to Modbus/TCP converter
● Supports VxComm technique for every COM port of controllers
● Supports 8K and 87K DI/DO/AI/AO modules
● Automatically scan I/O modules and range I/O registers address to continuous
● Support power on value and safe value for analog/digital output module
● Allowed several host PCs( client ) access simultaneously
● Firmware modifiable

Modbus/TCP Embedded Controller with 4 empty slots

● Supports Modbus/RTU to Modbus/TCP converter
● Supports VxComm technique for every COM port of controllers
● Supports 8K and 87K DI/DO/AI/AO modules
● Automatically scan I/O modules and range I/O registers address to continuous
● Support power on value and safe value for analog/digital output module
● Allowed several host PCs( client ) access simultaneously
● Firmware modifiable

Embedded Ethernet I/O Unit with 8 slots

● Supports IPv4
● Supports the Ethernet or RS-232 communication interface
● Supports DCON communication protocol
● Dual Bus designed to supports I-8K and I-87K series I/O modules, such as DI/DO, AI/AO, Counter/Frequency modules
● Compact I/O Expansion slot allows the quick installation of various 8K and 87K I/O modules
● By using the VxComm Utility, PC can use Virtual COM Port to communicate with the remote Ethernet I/O (Note: Remote Ethernet I/O must support XServer to have Virtual COM Port function)
● I/O configurable using DCON Utility via Ethernet port or RS-232 Port
● Firmware updated via the RS-232 port
● Firmware auto scan AI modules and can map alarm to DO modules on the slots
● Dual Watch Dog mechanism enable I-8000 system can work reliablely under harsh environment
● Ventilated housing designed to operate between –25 °C ~ +75 °C
● Using DIN-Rail clips or screw poles around the corners allows the control unit to be easily mounted on the control box
● Frame Ground provides a path for bypassing ESD, allowing enhanced static protection (ESD) capability and ensures that the module is more reliable
● Various SDKs provided (DLL, ActiveX, Labview driver, Indusoft driver, Linux driver, OPC server)

Embedded Ethernet I/O Unit with 4 slots

● Supports IPv4
● Supports the Ethernet or RS-232 communication interface
● Supports DCON communication protocol
● Dual Bus designed to supports I-8K and I-87K series I/O modules, such as DI/DO, AI/AO, Counter/Frequency modules
● Compact I/O Expansion slot allows the quick installation of various 8K and 87K I/O modules
● By using the VxComm Utility, PC can use Virtual COM Port to communicate with the remote Ethernet I/O (Note: Remote Ethernet I/O must support XServer to have Virtual COM Port function)
● I/O configurable using DCON Utility via Ethernet port or RS-232 Port
● Firmware updated via the RS-232 port
● Firmware auto scan AI modules and can map alarm to DO modules on the slots
● Dual Watch Dog mechanism enable I-8000 system can work reliablely under harsh environment
● Ventilated housing designed to operate between –25 °C ~ +75 °C
● Using DIN-Rail clips or Screw poles around the corners allows the control unit to be easily mounted on the control box
● Frame Ground provides a path for bypassing ESD, allowing enhanced static protection (ESD) capability and ensures that the module is more reliable
● Various SDKs provided (DLL, ActiveX, Labview driver, Indusoft driver, Linux driver, OPC server)

Embedded Ethernet I/O Unit with 8 slots

● Supports IPv4
● Supports the Ethernet or RS-232 communication interface
● Supports DCON communication protocol
● Dual Bus designed to supports I-8K and I-87K series I/O modules, such as DI/DO, AI/AO, Counter/Frequency modules
● Compact I/O Expansion slot allows the quick installation of various 8K and 87K I/O modules
● By using the VxComm Utility, PC can use Virtual COM Port to communicate with the remote Ethernet I/O (Remote Ethernet I/O must support XServer to have Virtual COM Port function)
● I/O configurable using DCON Utility via Ethernet port or RS-232 Port
● Firmware updated via the RS-232 port
● Firmware auto scan AI modules and can map alarm to DO modules on the slots
● Dual Watch Dog mechanism enable I-8000 system can work reliablely under harsh environment
● Ventilated housing designed to operate between –25°C to +75°C
● Easily mounted
● Frame Ground provides a path for bypassing ESD, allowing enhanced static protection (ESD) capability and ensures that the module is more reliable
● Various SDKs provided (DLL, ActiveX, Labview driver, Indusoft driver, Linux driver, OPC server)

Embedded Ethernet I/O Unit with 4 slots

● Supports IPv4
● Supports the Ethernet or RS-232 communication interface
● Supports DCON communication protocol
● Dual Bus designed to supports I-8K and I-87K series I/O modules, such as DI/DO, AI/AO, Counter/Frequency modules
● Compact I/O Expansion slot allows the quick installation of various 8K and 87K I/O modules
● By using the VxComm Utility, PC can use Virtual COM Port to communicate with the remote Ethernet I/O (Remote Ethernet I/O must support XServer to have Virtual COM Port function)
● I/O configurable using DCON Utility via Ethernet port or RS-232 Port
● Firmware updated via the RS-232 port
● Firmware auto scan AI modules and can map alarm to DO modules on the slots
● Dual Watch Dog mechanism enable I-8000 system can work reliablely under harsh environment
● Ventilated housing designed to operate between –25°C to +75°C
● Easily mounted
● Frame Ground provides a path for bypassing ESD, allowing enhanced static protection (ESD) capability and ensures that the module is more reliable
● Various SDKs provided (DLL, ActiveX, Labview driver, Indusoft driver, Linux driver, OPC server)