ICPDAS DN-8368GB
Photo-isolated terminal board for ICPDAS 3-axis stepper/servo controller
● High speed photo-coupling isolated
● Supporting pulse command type step motors or servo motors
● Providing power led and other status LEDs (home, limit switches)
The ICPDAS Daughter Board DN-8368GB is designed for ICP DAS’s 3-axis motion controllers, such as PISO-PS600, PISO-VS600 and PMDK. And they are for different motor drivers, such as general purpose usage and Mitsubishi motor amplifier. It is a not only a screw terminal board for easy connection of signals; it also provides onboard isolating circuitry to protect the controllers.
Interface signals are divided into four groups. Each group corresponds to a single axis and contains the necessary pulse output command lines, encoder feedback lines, special purpose inputs (Home, near home, limit -switches) and a servo-enable output. Terminal connectors are used for easy wiring purpose. Users can interchange connectors to interchange each axial definition without laborious rewiring. This board also contains onboard power module which provides different voltages for other onboard circuitry. And this power module accepts wide range input power (24 VDC).
ICPDAS Daughter Board DN-8368GB is for general purpose usage.
| Nominal Load | 0.5 A /24 VDC |
| Input Power | 24 VDC, 0.5 A |
| Power Consumption | 12 W (24 VDC) |
| Dimensions | 162 x 107 mm |
| Operating Temperature | -20 °C ~ +75 °C |
| Storage Temperature | -30 °C ~ +85 °C |
| Operating Humidity | 20 ~ 80 % RH, non-condensing |
| Storage Humidity | 10 ~ 90 % RH, non-condensing |
