ICPDAS NSM-205PFCS-60 - 4-Port 10/100 Mbps PoE (PSE) with 1 fiber port Switch metal case

Levertijd:
2~7 dagen
SKU
NSM-205PFCS-60

● Provides 1 x 100-FX fiber port plus 4 x PoE ports
● Automatic MDI/MDI-X crossover for plug-and-play
● Each port supports both 10/100Mbps speed auto negotiation
● Store-and-forward architecture
● Full duplex IEEE 802.3x and half duplex backpressure flow control
● 4 PoE ports with Power Sourcing Equipment (PSE) operation
● Auto-detection of PD (powered devices) and automatic power management
● Over-temperature, over-current and over/under-voltage detection
● Power Input, +46 ~ +55
● Supports operating temperatures from –30 °C ~ +75 °C

 

The NSM-205PFx is a 4-port unmanaged PoE (PSE) with 1 fiber port switch; it supports 4 PoE ports which are classified as power source equipments (PSE).

The NSM-205PFx makes centralized power supply come true and provides up to 15.4 watts of power per PSE port. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and highdistance (up to 60 km) transmissions.

Meer informatie
Art.nr.
NSM-205PFCS-60
Fabrikant
ICPDAS
Technology
Standards IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet)
Processing Type Store & forward, wire speed switching
MAC Addresses 1024
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE802.3x flow control, back pressure flow control
Interface
Single-Mode
100 Base-FX,; SC/ST Fiber Interface type
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125μm
Distance: 60 Km, (9/125 μm recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: -5 dBm
Max. TX Output: 0 dBm
Max. RX Sensitivity: -35 dBm
Max. RX Overload: -5 dBm
Budget: 30 dBm
Power Input
Input Voltage Range +46 ~ +55 VDC for PoE output
Power Consumption 0.08@ 48 VDC without PD loading
Protection Power reverse polarity protection
Frame Ground for EMS Protection Yes
Connection 3-Pin Removable Terminal Block
PoE Output
Compliance 100% IEEE 802.3af compliant
Classification PSE (Power Sourcing Equipment)
Voltage +48 VDC depending on power input
Power Up to 15.4 watts per channel
Operation Automatic detection and power management
Mechanical
Casing Metal
Environmental Rating IP30
Dimensions (w x l x h) 25 x 168 x 119mm
Installation DIN-Rail Mounting
Environmental
Operating Temperature -30 °C ~ +75 °C
Storage Temperature -40 °C ~ +85 °C
Humidity 10 ~ 90% RH, non-condensing
Mijn vraag gaat over: ICPDAS NSM-205PFCS-60 - 4-Port 10/100 Mbps PoE (PSE) with 1 fiber port Switch metal case
To Top