ICPDAS PROFI-5055

Levertijd:
2~7 dagen
SKU
PROFI-5055

PROFIBUS Remote I/O Module (8-channel Isolated Digital Input and 8-channel Isolated Digital Output)

 

● Support for PROFIBUS DP-V0 protocol
● Detect transmission rate automatically (Max. 12 Mbps)
● Address 0~99 set by rotary switches
● Network Isolation Protection
● 3000VDC isolation protection on PROFIBUS side
● 4kV ESD Protection (contact for any terminal)
● Wide range of power input (DC 10 ~ 40 VDC) and operating temperature (-25 °C ~ +75 °C)

 

The PROFI-5055 is specially designed for the slave device of PROFIBUS DP protocol. It supports up to 8-channel isolated digital input and 8-channel isolated digital output. Users can easily to choose and configure it by using the GSD file in any PROFIBUS Configurator.


https://fieldworks.nl/media/imageproducts/icpdas/PROFI-5055-1.jpg

 

APPLICATIONS:

● Industrial Automation
● Factory Automation
● Process Automation

https://fieldworks.nl/media/imageproducts/icpdas/Untitled-1_1.gif

Meer informatie
Art.nr.
PROFI-5055
Fabrikant
ICPDAS
Hardware
ESD Protection 4 kV class A
PROFIBUS Interface
Controller Profichip VPCLS2
Transceiver ADI ADM2486
Connector 9-pin female D-Sub
Baud Rate (bps) 9.6 k, 19.2 k, 45.45 k, 93.75 k, 187.5 k, 500 k, 1.5 M, 3 M, 6 M, 12 M
Transmission Distance Depend on baud rate (for example, max. 1200 m at 9.6 kbps )
Isolation 3000 VDC for DC-to-DC, 2500Vrms for bus-to-logic
Protocol DP-V0
LED Indicators
Round LED PWR LED, RUN LED
I/O
Digital Output
8 Channels (Sink), Isolated with common ground
Load Voltage: +10 ~ +40V
Maximum Load Current: 650mA w/o Short-Circuit Protection
Isolation Voltage: 3750Vrms
Digital Input
8 Channels (Sink or Source), Isolated from each other
Off Voltage Level: +4V Max. On Voltage Level: +10 ~ +50V
Input Impedance: 10KΩ in series with opto-coupler
Isolation Voltage: 3750Vrms
Power
Power supply Unregulated +10 ~ +40 VDC
Protection Reverse polarity protection, Overvoltage brownout protection
Power Consumption 1 W
Mechanical
Dimensions (w x l x h) 91 x 128 x 52mm
Installation DIN-Rail Mounting
Omgeving
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -30 °C ~ +85 °C
Humidity 5 ~ 95% RH, non-condensing
Mijn vraag gaat over: ICPDAS PROFI-5055
U bent wellicht ook geïnteresseerd in de volgende producten:
To Top