2~7 dagen

10-channel High Power Relay Module

● e-Classroom service
● Lighting Scenario Control
● Home and Building Automation
● 10 channels high power loops: 15A x 2, 10A x 2, 5A x 6
● NO/NC for each channel
● Protection circuit for each channel
● Logic and sequential power control
● Supports maximum 5 sets of interlock switches (e.g. for CW/CCW motor control)
● Supports RS-232 and RS-485 serial interface
● Supports Modbus/RTU protocol
● Assignable Modbus Network IDs: 1 ~ 15
● Supports IR remote control
● Built-in watchdog

The IR-310-RM is a 10-channel high power relay module designed for the power control of indoor appliances. The relay module can switch up to 15 A loads. There are NO/NC switches and protection circuit for each channel. The channels can be controlled logically or sequentially by serial communication with Modbus RTU protocol, as well as by wireless IR remote control. The application field can be manual/automatic power switch, timer switch, light scenario control and energy conservation etc.

Meer informatie
IR Interface
IR input
IR receiver
3.5 mm audio jack for IR remote input
Relay Output
Relay Types Form C relay SPDT
Contact Rating

250VAC @10A for RL1~RL4 
250VAC @15A for RL5, RL6
250VAC @5A for RL7~RL10


28VDC@15A for RL5, RL6
30VDC@5A for RL7~RL10

Operating Time(Max.) 10 ms for RL7~RL10, 15 ms for RL1~RL6
Release Time(Min.) 5ms for RL1~RL4 & RL7~RL10
10 ms for RL5, RL6
Max. Switching Power 1500 VA for RL1~RL4
2400VA/280W for RL5, RL6
2770VA/300W for RL7~RL10
Insulation Resistance 100 M Ohm min. at 500 VDC for RL7~RL10  
1000M Ohm min. at 500VDC for RL1~RL6
Life TIme Mechanical : 1 × 10^7 OPS
Electrical : 5 × 10^4 OPS for RL1~RL4, RL7~RL10
                    1 × 10^5 OPS for RL5,RL6
LED Indicators
1 LED as Power
10 LEDs as Relay Output indicators
Power Consumption; 5 W (max)
Dimensions (w x h x d) 260 mm x 50 mm x 110 mm
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -30 °C ~ +85 °C
Humidity 5 ~ 95%, non-condensing
Mijn vraag gaat over: ICPDAS IR-310-RM
To Top