ICS Prototyping Module Kit VXI-5502

Levertijd:
3~4 weken
SKU
VXI-5502

VXI Prototype Module Kits

● Choice of two prototyping boards and 4 VXI Shield Kits. Fastest way to build any size VXIbus module.
● User register-based VXI interface that provides digital I/O lines and a VXI data expansion bus. Easiest interface for controlling user's circuits.
● VXI-5502 has a Prototyping Board with holes on 0.1 centers plus power and ground planes. Breadboard analog or digital circuits.
CAD Design aids for PC board layout. Upward migration path to a PC board without major re-design.
User configurable VXI response registers. Personalizes the finished module as your product.

ICS Prototyping Module Kit VXI-5502 is a flexible, low-cost solution for developing prototype or short-run VXIbus modules. It uses VXI-5524 Register-based Interface card to interface with the VXIbus. The VXI-5524 provides the user with a simple but powerful interface for controlling his circuits from the VXIbus. The user circuits are constructed on the supplied bare or prototyping board that mates with the VXI-5524 to form a complete 'C'  size, VXI module.

Meer informatie
Art.nr.
VXI-5502
Fabrikant
ICS Electronics
GPIB Capabilities
VXI Capabilities
VXI-1 Revision 1.4 compliant
VXI-2 Revision 1.0 compliant
Static Address capability
Register based, servant device
A16 Address space, D16 Data
Programmable interrupter
Normal handshake data transfer
Includes VXI-2 version, Serial Number, Interrupt and Subclass Registers
Diagnostic Capability Four LEDs for VXI status and trouble shooting.
Controls and Indicators
Indicators
Four LEDs showing the state of the VXIbus interface and VXI-5524's logic.
RDY On after self test
ACCESS Blinks when address recognized
FAIL On when initialization failed
SYSFAIL VXIbus SysFail signal line
Interface Specifications
Digital I/O Lines 48 TTL/CMOS latched data lines with 33 KΩ pullups, 20 mA source and 40 mA sink capability. Data line direction set in 16-bit increments.
Expansion Bus 16 data lines, 4 address lines, strobe and write lines for addresses 0x20-0x38. All signals have 20 mA source and 40 mA sink capability.
Triggers VXI TTLTRG line pair. TrigIn# may be TTL Triggers 0,2 4, or 6. TrigOut# may drive TTL Trigger lines 1, 3, 5 or 7.
Interrupter Capability IRQ line and three Cause Code lines.
Other Signals
CLEAR# Low true pulse to reset user logic. 20 mA source / 40 mA sink.
RST# Low true input to reset VXI-5524 logic.
CLK10 VXIbus or VXI-5524 10 MHz clock. 20 mA source/40 mA sink.
LED Drive Singals for operating four front panel LEDs, 2 mA sink.
Grootte
233 x 263mm (H x D)
Power
Power Consumption
5 VDC @ 300 mA
-5.2 VDC at 45 mA
-5.2 VDC at 45 mA
Included Accessories
Instruction Manual with PCB layout drawings, design rules for user's PCB and example user circuits.
Programming guide and sample routines for user interface signals, and expansion bus data transfers.
Mounting bracket.
ICS Prototyping Module Kit VXI-5502 aanpassen
Aantal

* Verplichte velden

Uw configuratie
VXI Prototype Module Kits
ICS Prototyping Module Kit VXI-5502
Overzicht
    Mijn vraag gaat over: ICS Prototyping Module Kit VXI-5502
    To Top