Wij gebruiken cookies om uw ervaring beter te maken. Om te voldoen aan de cookie wetgeving, vragen we uw toestemming om de cookies te plaatsen. Meer informatie.
ICS GPIB-to-Serial Minibox 4866
Levertijd:
3~4 weken
SKU
4866
GPIB to Serial Interface
● Provides a smart GPIB-to-serial conversion path for a serial device. Adds an IEEE-488.2 compatible GPIB interface to any RS-232 or RS-422/485 serial device.
● Provides all IEEE-488.2 functions and the Status Reporting Structure. Easiest way to add IEEE-488.2 capability to any serial device.
● SCPI commands set serial configuration, GPIB address and IDN message. Easy setup customizes the 4866 for the application.
● Smart transparent serial data up to 57.6 Kbaud. Does not require escape sequences or a second GPIB address.
● Includes Diagnostic LEDs. Provides visual indication of unit's operation, address, and selftest status.
● Support includes menu driven configuration programs and GPIBkybd. The easy way to configure the interface or use the programs as examples.
The ICS GPIB-to-Serial Minibox 4866 is a smart IEEE-488.2 compatible, GPIB <-> Serial Interface that can be used to adapt devices with RS-232 and RS-422 or RS-485 serial interfaces to the GPIB Bus. The ICS GPIB-to-Serial Minibox 4866 provides an IEEE-488.2 compliant, GPIB-to-serial conversion path between the GPIB Bus and the serial device. The 4866's serial interface can be set for any standard baud rate up to 57.6 kbaud, for the common asynchronous data formats and for RS-232, RS-422 or RS-485 signals. All configuration settings are user setable and are saved in the 4866's EEPROM memory. The ICS GPIB-to-Serial Minibox 4866 can be used as a stand-alone box or rack mounted in a test system.
Typical applications are adding a GPIB interface to a sensor or instrument that has a serial interface or adding an IEEE-488.2 interface to an embedded computer board.
Meer informatie
Art.nr.
4866
Fabrikant
ICS Electronics
Land van herkomst
Verenigde Staten
GPIB Capabilities
| IEEE 488 Bus Interface |
|
||||
| Address Capability | Primary addresses 0-30 set by GPIB bus command. Address displayed on LED indicators at power turn-on. | ||||
| SRQ Generation |
|
||||
| Parallel Poll Response | Reports SRV Status in PPR bit | ||||
| Buffers and message lengths |
|
||||
| 488.2 Common Commands | *CLS, *ESE, *ESE?, *ESR?, *IDN?, *OPC, *OPC?, *RST, *SAV, *SRE, *SRE?, *STB, *TST?, AND *WAI. |
Interface Specifications
| Serial Interface | Provides RS-232C single ended or RS-485
(RS-422) differential signals on a DB-25S
connector. Pin assignments conform to EIA RS-530 specification and are pin compatible with most RS-232 devices. Signal selection by internal jumpers. |
||||||
| Baud Rates | 50 to 57,600 baud std. Closest integer rate for nonstandard rates. | ||||||
| Data Character Formats |
|
||||||
| Modes | Full-duplex - transmitter always active. Half-duplex - transmitter tristated 0.2 ms after last character. | ||||||
| Data Transfer Protocols | Hardware handshake always enabled. X-on /X-off handshake enabled or disabled by a separate command. |
SCPI Commands
The 4866 conforms to the SCPI 1994.0 Specification
and uses SCPI commands to set its |
Controls and Indicators
| Six on board LEDs show selftest diagnostics, GPIB address and status. | |
| PWR | On when power applied |
| RDY | On when Selftest passed |
| MTA | On when talk address recognized |
| MLA | On when listen address recognized |
| SRQ | On when SRQ generated |
| ERR | On when ESR error bit set |
Grootte
189.2 x 141.5 x 38.6 (l x w x h)
Omgeving
| Operating Temperature | -10 °C ~ +55 °C |
| Storage Temperature | -20 °C ~ +70 °C |
| Humidity | 0-90% RH without condensation |
| Shock/Vibration | Normal handling only |
| Casing | All metal case |
Power
9 to 32 Vdc @ 3.5 VA
Included Accessories
Instruction Manual |
| Support CD-ROM |
| UL/CSA/VDE approved AC power Adapters provided for Europe - 230±10% Vac, 50/60 Hz |