6-channel Analog Input, 2-channel Analog Output, 2-channel Digital Input and 2-channel Digital Output Module
● Multifunction (6AI, 2AO, 2DI and 2DO) ● Supports Fast Mode and Normal Mode ● Individual Channel Configuration ● Open Wire Detection for Current Output ● Overload and Short Circuit Protection for Digital Output ● Configurable Power-on Value Settings ● Configurable Safe Value Settings ● 240 Vrms Overvoltage Protection for Voltage Input ● 70 VDC Over Voltage Protection for Digital Input ● Jumper Selectable Voltage or Current Input/Output ● Dual Watchdog ● ±4 kV Contact ESD Protection ● Operating Temperature Range: -25 °C ~ +75 °C
The ICPDAS Multifunction Module I-87026PW is a multifunction module that includes 6 analog input channels, 2 analog output channels, 2 digital input channels, 2 digital output channels. It provides a programmable input range on all analog input (±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V, ±20 mA or 0 ~ 20 mA), analog outputs are 12 bit at ±5 V, ±10 V, 0 ~ 20 mA or 4 ~ 20 mA and all digital outputs can be set as alarm output. Each analog input can be configured for an individual range and provides a high overvoltage protection of 240 Vrms. Voltage and current inputs/outputs are jumper selectable.
With different communication interface, the I/O modules can be classified to high communication speed (Parallel bus) 8K series modules and low communication speed (serial interface) 87K series modules.
There are two types of I/O modules, Parallel and Serial. The parallel modules (I-8 Series) are high-speed modules and support MCU (Main Control Unit) only.
Item
I-87K Series
Communication Interface
Serial Bus
Protocol
DCON
Communication Speed
Slow
DI with Latched Function
Y
DI with Counter Input
Y (100 Hz)
Power On Value
Y
Safe Value
Y
Programmable Slew-rate for AO Module
Y
High Profile VS Low Profile
With different form factor, I/O modules can be classified to high profile and low profile. Basically, high profile and low profile modules that with same item number also have same I/O channel number.
For example: I-8054 and I-8054W both has 8 DI and 8 DO.
Except I/O channel number, other specifications could be different. You have to double check whether the specifications suit your application.
For example: For I-8054W, its DI logic high level is +10 ~ +50V. But for I-8054, it is +3.5 ~ +30V
I-87K Series
High Profile
Low Profile
XPAC
Y
-
WinPAC
Y
-
LinPAC
Y
-
iPAC
Y
-
ViewPAC
Y
-
RU-87P1/2/4/8
Y
-
USB-87P1/2/4/8
Y
-
WinCon
Y
Y
LinCon
Y
Y
I-8000
Y
Y
I-8KE4/8
Y
Y
I-8KE4/8-MTCP
Y
Y
I-87K4/5/8/9
Y
Y
APPLICATIONS:
● Industry Automation ● Industrial Machinery ● Building Automation ● Food & Beverage Systems ● Semiconductor Fabrication ● Control Systems
